| |
CX2SA > SATDIG 06.08.11 21:04l 170 Lines 4897 Bytes #999 (0) @ WW
BID : AMSATBB6438
Read: GUEST
Subj: AMSAT-BB-digest V6 438
Path: IZ3LSV<IK2XDE<HB9TVW<DB0ANF<CX2SA
Sent: 110806/1903Z @:CX2SA.LAV.URY.SA #:20437 [Minas] FBB7.00e $:AMSATBB6438
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: ARISSatTLM (Mark L. Hammond)
2. VS: ARISSatTLM (Jari Koivurinne)
3. Re: ARISSatTLM (N0JY)
----------------------------------------------------------------------
Message: 1
Date: Sat, 06 Aug 2011 13:44:40 -0400
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
Subject: [amsat-bb] Re: ARISSatTLM
To: n0jy@xxxx.xxxx AMSAT-BB@xxxxx.xxx
Message-ID: <H5ks1h00756cfur055ksK6@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Hi Jerry,
Is there anything between the speaker out and line in (or mic) on the sound
card?
What are you using for radio/Doppler control?
Mark N8MH
At 11:31 AM 8/6/2011 -0500, N0JY wrote:
>I'm having trouble getting telemetry.
>ARISSatTLM will see the signal on the Tuning Indicator and I have tuned
>the CW signal everywhere from the yellow mark to the top and bottom of
>the blue range.
>It decodes the CW fine in the Morse Code Decoder window but nothing ever
>shows up in the Telemetry As Text or ARISSatTLM main window.
>The orange indicator is following something, usually hanging around the
>middle of the orange line range when there is a signal.
>Any thoughts? Windows Vista SP2 with M-Audio Delta44 sound card set for
>48000Hz sample rate.
>
>Thanks!
>Jerry
>N0JY
>
>
>__________ Information from ESET NOD32 Antivirus, version of virus
signature database 6356 (20110806) __________
>
>The message was checked by ESET NOD32 Antivirus.
>
>http://www.eset.com
>
>
>
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Sat, 6 Aug 2011 17:51:37 -0000
From: "Jari Koivurinne" <jari.koivurinne@xxxx.xxx>
Subject: [amsat-bb] VS: ARISSatTLM
To: <n0jy@xxxx.xxx>, <AMSAT-BB@xxxxx.xxx>
Message-ID: <000c01cc5461$7d2e50d0$778af270$@xxxxxxxxxx@xxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
>
> I'm having trouble getting telemetry.
> ARISSatTLM will see the signal on the Tuning Indicator and I have tuned
> the CW signal everywhere from the yellow mark to the top and bottom of
> the blue range.
> It decodes the CW fine in the Morse Code Decoder window but nothing
> ever
> shows up in the Telemetry As Text or ARISSatTLM main window.
> The orange indicator is following something, usually hanging around the
> middle of the orange line range when there is a signal.
> Any thoughts? Windows Vista SP2 with M-Audio Delta44 sound card set
> for
> 48000Hz sample rate.
>
> Thanks!
> Jerry
> N0JY
>
I was also having trouble getting telemetry. Signal was quite strong and
all indicators was within range. The telemetry and CW stopped twice within
pass. CW was decoded but maybe the deep QSB made some impact to the
telemetry.
I have 2x 17 el horizontal yagis, FT-847 and Realtek AC97 audio system.
Sampe rate was 44.1 kHz.
Next time I try Edirol UA-1 USB sound card. Have to set alarm clock at 4 am
local time as this is the only time ISS is well above horizon... :-)
And please try the ARISSatTLM software and decode some frames as it is no
help if you just say you can hear some noise...
-jari oh3uw
------------------------------
Message: 3
Date: Sat, 06 Aug 2011 13:03:23 -0500
From: N0JY <n0jy@xxxxxxx.xxx>
Subject: [amsat-bb] Re: ARISSatTLM
To: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
Cc: AMSAT-BB@xxxxx.xxx
Message-ID: <4E3D81EB.50804@xxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi Mark,
I'm using the speaker output so it's speaker audio with no additional
filters, right to the Delta44 breakout box.
SatPC32 does the doppler, it's set for 20Hz interval. Should I set that
lower, to 10Hz perhaps?
I am going to try to use the audio from the data output on the FT-736R.
A brain fade on my part prevented me from getting the signal off the
ring of the stereo connection, but I just woke up and remembered that I
have the splitters for that so I've got that connected to the breakout
box now!
73,
Jerry
On 8/6/2011 12:44 PM, Mark L. Hammond wrote:
> Hi Jerry,
>
> Is there anything between the speaker out and line in (or mic) on the
sound card?
>
> What are you using for radio/Doppler control?
>
> Mark N8MH
>
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6356 (20110806) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 6, Issue 438
****************************************
Read previous mail | Read next mail
| |
