| |
CX2SA > SATDIG 03.06.11 07:24l 735 Lines 20323 Bytes #999 (0) @ WW
BID : AMSATBB6302
Read: GUEST
Subj: AMSAT-BB-digest V6 302
Path: IZ3LSV<IW0QNL<ON4HU<DB0RES<DK0WUE<7M3TJZ<CX2SA
Sent: 110603/0520Z @:CX2SA.LAV.URY.SA #:8871 [Minas] FBB7.00e $:AMSATBB6302
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: Fixed! Re: Landwehr 70cm preamp device (G. Beat)
2. SO-67? (Ted)
3. Rotator Control units (Tim Tuck)
4. Re: Rotator Control units (Dave Webb KB1PVH)
5. Hawaii Qsl (Kevin Deane)
6. Re: Hawaii Qsl (Patrick STODDARD (WD9EWK/VA7EWK))
7. Re: Rotator Control units (Ted)
8. Re: Hawaii Qsl (Ted)
9. Re: Hawaii Qsl (Andreas Junge)
10. Hawaii (Kevin Deane)
11. Re: Fwd: [funcube] Order your FUNcube Dongle Pro-Tuesday31
May at 21:00UTC (Jeremy Bomkamp)
12. 5in em55 (wa4hfn@xxxxxxx.xxxx
13. Re: Rotator Control units (Dee)
14. SO-67 Back On (John Papay)
15. AO-51 coming out of eclipse over Hawaii (Robert Smith)
16. ears (Kevin Deane)
17. Re: SO-67 Back On (Daniel Lind)
18. Re: SO-67? (Clayton Coleman)
19. Re: SO-67 Back On (Daniel Lind)
20. Re: Hawaii Qsl (Tom Deeble)
21. AO-51over ZL (Alan Cresswell)
----------------------------------------------------------------------
Message: 1
Date: Thu, 2 Jun 2011 19:43:29 +0000 (UTC)
From: "G. Beat" <gregory.beat@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Fixed! Re: Landwehr 70cm preamp device
To: amsat-bb@xxxxx.xxx
Message-ID:
<1020722076.1625425.1307043809981.JavaMail.root@xxxxxxx.xxxxxxxxxx.xx.xxxx.xxx
xxxx.xxx>
Content-Type: text/plain; charset=utf-8
FYI, parts for the Landwehr pre-amps
Ted at Radio DAN still?carries?replacement Mitsubishi MGF1402 GaAsFET
(discontinued)
http://www.radiodan.com/ted_stuff/landwehr.htm
RF Parts lists the Mitsubishi MGF series
MGF1402 - was listed as $18.95 in 2007, currently (2011) you need to Call
for Price.
http://www.rfparts.com/transistors_2SKand3SK.html#bf
Check with K0KN ...?from an earlier AMSAT-BB posting -- he may have?extra !
http://www.amsat.org/amsat/archive/amsat-bb/200701/msg00021.html
PC Electronics?carried the part in 2007, but they may have sold?their
remaining stock.
http://www.hamtv.com/specials.html
GH Engineering (UK)
http://www.ghengineering.co.uk/prices.htm#Mitsubishi
Greg
w9gb
====
Date: Thu, 2 Jun 2011 08:59:54 -0500 (CDT)
From: n0jy
Subject: [amsat-bb] Re: Fixed! Re: Landwehr 70cm preamp device
????????question?
To: "Mark L. Hammond"
Cc: K5OE
I'm glad you shared this all here Mark, I have a 2M Landwehr that's been
cranking along since 1993 or so, I've never looked inside but this thread
is something I'll keep in case it gets flaky on me.
73,
Jerry
N0JY
------------------------------
Message: 2
Date: Thu, 2 Jun 2011 14:13:41 -0700
From: "Ted" <k7trkradio@xxxxxxx.xxx>
Subject: [amsat-bb] SO-67?
To: <amsat-bb@xxxxx.xxx>
Message-ID: <7AA58D1D15154D1CB12D94E7E7DFBC1C@xxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Do we get her soon?
Ted, K7TRK
------------------------------
Message: 3
Date: Fri, 03 Jun 2011 07:48:55 +1000
From: Tim Tuck <timt@xxxxxxx.xxx>
Subject: [amsat-bb] Rotator Control units
To: amsat-bb@xxxxx.xxx
Message-ID: <4DE80547.6090808@xxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi All,
What's everyone using for computer to rotator interfaces these days ?
I have the old KR400/500 rotator units to control that I was using
ARSWIN for but since I upgraded to 64 bit XP that no longer works and
there doesn't appear to be a software upgrade :(
So... I either have to build or buy a new controller.
regards
Tim
--
VK2XTT :: QF56if :: BMARC :: WIA :: AMSAT-VK :: AMSAT
------------------------------
Message: 4
Date: Thu, 2 Jun 2011 19:04:38 -0400
From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
Subject: [amsat-bb] Re: Rotator Control units
To: Tim Tuck <timt@xxxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Message-ID: <BANLkTiksHQb3HZ8811jkq9p=6Bog1y1W8g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Tim,
I'm using an Easy Rotor Controller model ERC-R.
http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X
On Jun 2, 2011 6:09 PM, "Tim Tuck" <timt@xxxxxxx.xxx> wrote:
------------------------------
Message: 5
Date: Thu, 2 Jun 2011 16:29:49 -0700
From: Kevin Deane <summit496@xxxx.xxx>
Subject: [amsat-bb] Hawaii Qsl
To: <amsat-bb@xxxxx.xxx>
Message-ID: <COL107-W58985E594E5305B66938A6837C0@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Has anyone ever got Hawaii from the West Coast? Hopefully Robert NH7WN will
get back to me, a friend and I would really like to try it!
Kevin
KF7MYK
------------------------------
Message: 6
Date: Thu, 2 Jun 2011 16:39:02 -0700
From: "Patrick STODDARD (WD9EWK/VA7EWK)" <amsat-bb@xxxxxx.xxx>
Subject: [amsat-bb] Re: Hawaii Qsl
To: amsat-bb@xxxxx.xxx
Message-ID: <BANLkTi=u7PmvEfXssioTjmvib-TV3c4Tsw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Hi Kevin!
> Has anyone ever got Hawaii from the West Coast? Hopefully Robert
> NH7WN will get back to me, a friend and I would really like to try it!
Yes, it is possible to get Hawaii on FM satellites from the US West Coast
or west of the Rockies. Robert NH7WN, who just posted here on the -BB
recently, is the first satellite QSO for many. His e-mail address as listed
on QRZ.com (the same address he uses to post here) is good, and he
has been very good at making schedules to work stations on the mainland.
He is also very good at getting QSL cards out to the stations he works.
Good luck with that, and maybe I will hear you on Saturday from a hamfest
in the morning and wherever I end up later in the day.
73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
------------------------------
Message: 7
Date: Thu, 2 Jun 2011 16:41:38 -0700
From: "Ted" <k7trkradio@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Rotator Control units
To: "'Dave Webb KB1PVH'" <kb1pvh@xxxxx.xxx>, "'Tim Tuck'"
<timt@xxxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Message-ID: <D807F549A84845E382A926F3E7649DE8@xxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Tim and all,
I'm starting to think I may have had a fantasy about rotor control...I have
a NIB Kenpro KR-5400A,(full az/el) which I have assumed could be controlled
directly by the SAT program in HRD without any other interface except the
controller that comes with the Kenpro. Is that not so? (I have not yet
installed the rotor, so no big deal ...yet)
Hmmmm...Ted, K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Dave Webb KB1PVH
Sent: Thursday, June 02, 2011 4:05 PM
To: Tim Tuck
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Rotator Control units
Tim,
I'm using an Easy Rotor Controller model ERC-R.
http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X
On Jun 2, 2011 6:09 PM, "Tim Tuck" <timt@xxxxxxx.xxx> wrote:
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Thu, 2 Jun 2011 16:49:22 -0700
From: "Ted" <k7trkradio@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Hawaii Qsl
To: "'Kevin Deane'" <summit496@xxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <BB4450B63997482FAC50CD94112C36A7@xxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Kevin, Robert will qsl if you get him...he has a nice card. Suggest you
e-mail him for a sked setup
The next pass for AO-51 may include HA...give it a shout
73, Ted, K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Kevin Deane
Sent: Thursday, June 02, 2011 4:30 PM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Hawaii Qsl
Has anyone ever got Hawaii from the West Coast? Hopefully Robert NH7WN will
get back to me, a friend and I would really like to try it!
Kevin
KF7MYK
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 9
Date: Thu, 2 Jun 2011 16:55:42 -0700
From: Andreas Junge <andreas@xxxx.xxx>
Subject: [amsat-bb] Re: Hawaii Qsl
To: Kevin Deane <summit496@xxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Message-ID: <B3AF307A-0A22-4994-BE69-0D125B880B04@xxxx.xxx>
Content-Type: text/plain; charset=us-ascii
I have done it through HO-68 on FM from the San Francisco Bay Area.
73,
Andreas, N6NU
On Jun 2, 2011, at 4:29 PM, Kevin Deane wrote:
>
>
> Has anyone ever got Hawaii from the West Coast? Hopefully Robert NH7WN
will get back to me, a friend and I would really like to try it!
>
> Kevin
> KF7MYK
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 10
Date: Thu, 2 Jun 2011 17:10:10 -0700
From: Kevin Deane <summit496@xxxx.xxx>
Subject: [amsat-bb] Hawaii
To: <amsat-bb@xxxxx.xxx>
Message-ID: <COL107-W1785C3A471BA073BCCE0E4837F0@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Thanks Guys! Probly have a better shot from my brothers station, I will try
to set somethin up with Robert. I am set up with the Elk right now we'll see
if 51 is on or not.
Kevin
------------------------------
Message: 11
Date: Thu, 2 Jun 2011 17:33:49 -0700 (PDT)
From: Jeremy Bomkamp <wa113y3s@xxxxx.xxx>
Subject: [amsat-bb] Re: Fwd: [funcube] Order your FUNcube Dongle
Pro-Tuesday31 May at 21:00UTC
To: amsat-bb@xxxxx.xxx
Message-ID: <571635.6089.qm@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Why bother paying the ebay price? Buy one from the source and it shows up at
the door in a couple days, and the supply seems to be getting better
------------------------------
Message: 12
Date: Fri, 3 Jun 2011 00:56:12 +0000 (UTC)
From: wa4hfn@xxxxxxx.xxx
Subject: [amsat-bb] 5in em55
To: AMSAT <amsat-bb@xxxxx.xxx>
Message-ID:
<1885570906.869373.1307062572807.JavaMail.root@xxxxxxx.xxxxxxxxxxx.xx.xxxx.xxx
xxxx.xxx>
Content-Type: text/plain; charset=utf-8
Hey guys dont forget the 5 in EM55 award is now going on
to see the award and rules go QRZ and look up WA4NVM
good hunting
WA4HFN em55
------------------------------
Message: 13
Date: Thu, 02 Jun 2011 21:01:08 -0400
From: Dee <morsesat@xxxxxxxxx.xxx>
Subject: [amsat-bb] Re: Rotator Control units
To: "'Ted'" <k7trkradio@xxxxxxx.xxx>, "'Dave Webb KB1PVH'"
<kb1pvh@xxxxx.xxx>, "'Tim Tuck'" <timt@xxxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Message-ID: <9DA7DAF1BD944B009CB64EF8E4EBD1F9@xxxxxxxx>
Content-Type: text/plain; charset=us-ascii
Everyone,
What is a normal setup, there is an interface unit that goes in-between the
computer and the rotor control. I have a Yaesu G5400 that has the DIN plug
in the rear that directly connects to the "LVB Tracker box" that I purchased
from AMSAT (a fundraiser for them and available for sale on their website).
It is easy to hook up and directly connects to many rotor software products-
The SATPC32 that AMSAT sells not only controls your rotor but it will
control your Doppler correction if you use it to tune your radio via another
port.
Check the web for other devices and schemes to control rotors.
73,
Dee, NB2F
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Ted
Sent: Thursday, June 02, 2011 7:42 PM
To: 'Dave Webb KB1PVH'; 'Tim Tuck'
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Rotator Control units
Tim and all,
I'm starting to think I may have had a fantasy about rotor control...I have
a NIB Kenpro KR-5400A,(full az/el) which I have assumed could be controlled
directly by the SAT program in HRD without any other interface except the
controller that comes with the Kenpro. Is that not so? (I have not yet
installed the rotor, so no big deal ...yet)
Hmmmm...Ted, K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Dave Webb KB1PVH
Sent: Thursday, June 02, 2011 4:05 PM
To: Tim Tuck
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Rotator Control units
Tim,
I'm using an Easy Rotor Controller model ERC-R.
http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X
On Jun 2, 2011 6:09 PM, "Tim Tuck" <timt@xxxxxxx.xxx> wrote:
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 14
Date: Thu, 02 Jun 2011 21:47:36 -0400
From: John Papay <john@xxxxxx.xxx>
Subject: [amsat-bb] SO-67 Back On
To: amsat-bb@xxxxx.xxx
Message-ID: <831588.37648.qm@xxxxxxx.xxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed
SO-67 was on at 0125z 3June2011. Quite
a surprise since no mention of it on
http://www.amsatsa.org.za/ Quite strong
as usual.
73,
John K8YSE
------------------------------
Message: 15
Date: Thu, 2 Jun 2011 16:15:59 -1000
From: Robert Smith <dukenuke@xxxx.xxx>
Subject: [amsat-bb] AO-51 coming out of eclipse over Hawaii
To: AMSAT-BB@xxxxx.xxx
Message-ID: <33500987-F6B1-4A86-915E-DFF7CB693849@xxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Aloha
Unless someone has set up a strange repeater there is absolutely
no doubt AO51 was alive and well as she came out of eclipse moments ago.
I was able to hear myself perfectly on the downlink (145.880 up and
435.150 down). Unfortunately, the footprint from here only touched the
west coast. Had an Alaska station been on, I am sure there would have
been a QSO. The signal was strong the entire pass.
(Could I be missing something?).
robert, NH7WN
Honolulu, HI
------------------------------
Message: 16
Date: Thu, 2 Jun 2011 20:18:37 -0700
From: Kevin Deane <summit496@xxxx.xxx>
Subject: [amsat-bb] ears
To: <amsat-bb@xxxxx.xxx>
Message-ID: <COL107-W396D83EE02BBAB1D95E45E837F0@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Somebody forgot to plug in the right coax again, who might have that been, I
am blaming KF1BUZ
No wonder I cant hear!
KF7MUD
------------------------------
Message: 17
Date: Thu, 2 Jun 2011 20:24:50 -0700
From: Daniel Lind <kf1buz@xxxxx.xxx>
Subject: [amsat-bb] Re: SO-67 Back On
To: "'John Papay'" <john@xxxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <000e01cc219d$cd2c33f0$67849bd0$@xxx>
Content-Type: text/plain; charset="us-ascii"
This here last pass was great,
W5PFG new grid for me I have your card in hand, KF7MYK always fun to talk at
all of the what 50 miles, and N8RO how many cards are we up to now?
Love them birds.....
1 hour till good west coast pass might go out side on that one.
Kf1Buz
Dan
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of John Papay
Sent: Thursday, June 02, 2011 6:48 PM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] SO-67 Back On
SO-67 was on at 0125z 3June2011. Quite
a surprise since no mention of it on
http://www.amsatsa.org.za/ Quite strong as usual.
73,
John K8YSE
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 18
Date: Thu, 2 Jun 2011 19:48:56 -0500
From: Clayton Coleman <kayakfishtx@xxxxx.xxx>
Subject: [amsat-bb] Re: SO-67?
To: amsat-bb@xxxxx.xxx
Message-ID: <BANLkTikouxXaxoqA7-sMsWfRxLiEMoBUAQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
"Absence makes the heart grow fonder." This expression is a perfect fit for
SO-67's schedule over North America. Because it's not always available, I
feel it's a real treat when it's activated for us. I check the SA AMSAT
website often for schedule updates. http://www.amsatsa.org.za/
I'm grateful to all those involved with the satellite and for the
opportunity to gain much pleasure from its use.
73
Clayton
W5PFG
On Thu, Jun 2, 2011 at 4:13 PM, Ted <k7trkradio@xxxxxxx.xxx> wrote:
> Do we get her soon?
>
> Ted, K7TRK
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 19
Date: Thu, 2 Jun 2011 21:55:58 -0700
From: Daniel Lind <kf1buz@xxxxx.xxx>
Subject: [amsat-bb] Re: SO-67 Back On
To: "'John Papay'" <john@xxxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <001201cc21aa$8857e3c0$9907ab40$@xxx>
Content-Type: text/plain; charset="us-ascii"
The 0440utc pass like 20 min ago... is uploaded to my youtube account if you
all care to hear what that's like....
http://www.youtube.com/watch?v=6KEaSuAVYXQ
Kf1buz
Dan
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of John Papay
Sent: Thursday, June 02, 2011 6:48 PM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] SO-67 Back On
SO-67 was on at 0125z 3June2011. Quite
a surprise since no mention of it on
http://www.amsatsa.org.za/ Quite strong as usual.
73,
John K8YSE
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 20
Date: Fri, 3 Jun 2011 01:12:12 -0400 (EDT)
From: Tom Deeble <ka6sip@xxx.xxx>
Subject: [amsat-bb] Re: Hawaii Qsl
To: summit496@xxxx.xxxx amsat-bb@xxxxx.xxx
Message-ID: <8CDEFC3EE0465F4-1FD0-352C2@xxxxxxxxxxxx.xxxxxx.xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Kevin,
Hawaii is possible but passes on AO-51 need to be close to the 1/2 way point
between the west coast and Hawaii.
Last September my wife & I went to Oahu and I operated from the entrance to
Diamond Head. I was able
to make a contact with Glenn, AA5PK, in Texas from there. We figured that we
were both around 1 degree over the horizon.
All I had was my trusty Arrow, IC-W32A and Hamtronics 450 preamp. Pretty
amazing what these sats can do!
But don't do as I find myself forgetting to do too often - keep those keps
up to date!
- Tom, KA6SIP
-----Original Message-----
From: Kevin Deane <summit496@xxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Sent: Thu, Jun 2, 2011 4:45 pm
Subject: [amsat-bb] Hawaii Qsl
as anyone ever got Hawaii from the West Coast? Hopefully Robert NH7WN will get
ack to me, a friend and I would really like to try it!
evin
F7MYK
______________________________________________
ent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
ot an AMSAT-NA member? Join now to support the amateur satellite program!
ubscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 21
Date: Fri, 3 Jun 2011 05:16:48 -0000
From: "Alan Cresswell" <alancresswell@xxxx.xx.xx>
Subject: [amsat-bb] AO-51over ZL
To: <amsat-bb@xxxxx.xxx>
Message-ID: <CBD4DEEC26AB41AC9A7ED04640083423@xxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
AO-51 solid signals in ZL. AOS (0459 UT) about five minutes after it came
out of eclipse.
Alan
ZL2BX
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 6, Issue 302
****************************************
Read previous mail | Read next mail
| |
