| |
CX2SA > SATDIG 11.10.10 21:04l 735 Lines 22870 Bytes #999 (0) @ WW
BID : AMSATBB5409
Read: GUEST
Subj: AMSAT-BB-digest V5 409
Path: IZ3LSV<IW8PGT<CX2SA
Sent: 101011/1904Z @:CX2SA.LAV.URY.SA #:25304 [Minas] FBB7.00e $:AMSATBB5409
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. WD9EWK @ EN40/EN41 in 25 min (Patrick STODDARD)
2. Re: I'd like your shack ideas (David Giles)
3. G-5500 Orientation (Dean Maluski)
4. Successful Glide Test For Spacecraft (B J)
5. WD9EWK @ EN40/EN41, Monday (11 Oct) morning on AO51
(Patrick STODDARD)
6. ts790 split programming (Gary Lockhart)
7. Re: G-5500 Orientation (Jim Wright)
8. ND9M Road Trip Update #6 (claryco@xxx.xxxx
9. Re: G-5500 Orientation (i8cvs)
10. Re: G-5500 Orientation (Greg D.)
11. Re: G-5500 Orientation (Greg D.)
12. amsat satellites in use (MAHDINEJAD@xxx.xx.xxx
13. conference (Nick Pugh K5QXJ)
14. Re: amsat satellites in use (Andrew Glasbrenner)
15. Re: amsat satellites in use (Michael Wolthuis)
16. AO-51 mode: dual repeaters (to support JOTA) (Mark L. Hammond)
17. NO-44 Pcsat-11 is alive ! (Pedro Converso)
----------------------------------------------------------------------
Message: 1
Date: Sun, 10 Oct 2010 16:35:20 -0700 (PDT)
From: Patrick STODDARD <amsat-bb@xxxxxx.xxx>
Subject: [amsat-bb] WD9EWK @ EN40/EN41 in 25 min
To: amsat-bb@xxxxx.xxx
Message-ID: <889248.25262.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Hi!
WD9EWK will work 3 upcoming passes from the EN40/EN41 boundary north
of Galesburg IL this evening. The passes....
2358-0007 AO51 (very low to my west)
0004-0026 AO7 (if in mode B)
0013-0029 FO29 (I will switch over when I stop working anyone
on AO7, or the whole pass if AO7 is not on)
I should also be on AO51 tomorrow morning from either this boundary or
in EN40, before moving back toward Chicago.
73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
------------------------------
Message: 2
Date: Mon, 11 Oct 2010 10:34:39 +1030
From: David Giles <vk5dg@xxxx.xxx.xx>
Subject: [amsat-bb] Re: I'd like your shack ideas
To: amsat-bb@xxxxx.xxx
Message-ID: <4CB25497.6070609@xxxx.xxx.xx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hello All,
Thankyou to those who replied. It looks like I will be getting a
footswitch as well as experimenting with mics and layout in general.
Looking forward to it.
73 de David VK5DG
------------------------------
Message: 3
Date: Sun, 10 Oct 2010 13:07:08 -0400
From: Dean Maluski <dean@xxxxx.xxx>
Subject: [amsat-bb] G-5500 Orientation
To: amsat-bb@xxxxx.xxx
Message-ID: <1286730428.9499.12.camel@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"
I am installing a G-5500 Elevation rotor and trying to determine
orientation of elevation with reference to software specifically
rtrcontrold for Linux but I'd suspect this would be typical to most PC
applications.
If a sat is 45 degrees above horizon should rotor control read 45 or 135
degrees on the hardware control dial?
What I'm asking is when I want to mount antenna where 90 degrees is
horizontal or vertical?
It seems natural that midway point is horizontal but midway point is 90
degrees. I don't think I ever have a reason to point antenna into the
mud so it makes most sense that midway 90 degrees is straight up??
------------------------------
Message: 4
Date: Sun, 10 Oct 2010 18:34:08 -0700 (PDT)
From: B J <top_gun_canada@xxxxx.xxx>
Subject: [amsat-bb] Successful Glide Test For Spacecraft
To: amsat-bb@xxxxx.xxx
Message-ID: <969234.75310.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
http://spaceflightnow.com/news/n1010/10ss2/
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 5
Date: Sun, 10 Oct 2010 19:03:28 -0700 (PDT)
From: Patrick STODDARD <amsat-bb@xxxxxx.xxx>
Subject: [amsat-bb] WD9EWK @ EN40/EN41, Monday (11 Oct) morning on
AO51
To: amsat-bb@xxxxx.xxx
Message-ID: <499622.63783.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Hi!
I made it to the EN40/EN41 boundary north of Galesburg IL, but not in
time to work the eastern USA on an FM satellite. One very
shallow AO51 pass out west, then two higher passes on AO7 and
FO29, as the sun set this evening. I will go back to the same spot
tomorrow morning for the AO51 passes at 1023 and 1202 UTC. I will
look at other passes after these, but will probably start heading
back toward Chicago after these passes. I may make a mid-morning
detour to Davenport in Iowa (EN41) for a couple of passes, before hitting
I-88 back to Chicago. Maybe on SO50, and/or an SSB bird.
APRS is spotty in much of the Illinois flatlands, but I will run
my VX-8GR with my position for that drive as WD9EWK-7 . You may
see me at http://aprs.fi/wd9ewk-7 online.
Thanks for all the QSOs today on all 3 FM birds, along with AO7 and
FO29. I started my drive at EN51/EN52/EN61/EN62 after I left
the Symposium, then an SO50 pass at the Illinois/Wisconsin state line
north of Chicago (EN62), and other passes in that grid as well as EN51
and EN41 before reaching the EN40/EN41 boundary. And did I mention
I was enjoying all of this? The rental car has over 350 miles (563km) on
it so far since arriving in Chicago Thursday, and it will see at least
150 more miles (241km) for the drive back to Chicago.
73!
Patrick WD9EWK/VA7EWK - Galesburg, Illinois
http://www.wd9ewk.net/
------------------------------
Message: 6
Date: Sun, 10 Oct 2010 19:57:04 -0700 (PDT)
From: Gary Lockhart <gary_lockhart33@xxxxx.xxx>
Subject: [amsat-bb] ts790 split programming
To: amsat-bb@xxxxx.xxx
Message-ID: <945225.38899.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
I have the operating manual and followed the instructions for loading split
freqs but I keep getting unexpected 2M freqs., just random changes from what I
tried to load. Is it just a weak memory battery? Very little TS790 forum
history
for this problem or others for that matter. Off list reply is fine since this
isn't really the mission of this bb.
Gary AB3ID
------------------------------
Message: 7
Date: Sun, 10 Oct 2010 23:34:31 -0400
From: Jim Wright <wa4ivm@xxxxx.xxx>
Subject: [amsat-bb] Re: G-5500 Orientation
To: amsat-bb@xxxxx.xxx
Message-ID: <4CB285C7.30602@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
You want to mount the antenna on the elevation rotor horizontal so it
can flip over on it's back and track through the AZ mechanical stop.
For instance, if the bird is going though North/South, which ever you
have for the mechanical stop, software can control it to flip on it's
back and azimuth is 180 degrees off so you are able to track through
the stop and keep on chasing the bird instead of going 360 in the wrong
direction and wasting the minute it takes to go 360.
For example stop is at North. Point AZ at South and have EL at 180.
Actually it is pointing North because the EL is making it look like it
is North. As the bird comes past AOS the EL rotor backs down and the AZ
rotor comes around, ending up on the stop at LOS in this example. Some
software will let you enjoy the 450 degrees AZ and the 180 EL without so
much fuss, but this works.
Good luck.
73,
Jim
On 10/10/2010 1:07 PM, Dean Maluski wrote:
> I am installing a G-5500 Elevation rotor and trying to determine
> orientation of elevation with reference to software specifically
> rtrcontrold for Linux but I'd suspect this would be typical to most PC
> applications.
> If a sat is 45 degrees above horizon should rotor control read 45 or 135
> degrees on the hardware control dial?
> What I'm asking is when I want to mount antenna where 90 degrees is
> horizontal or vertical?
> It seems natural that midway point is horizontal but midway point is 90
> degrees. I don't think I ever have a reason to point antenna into the
> mud so it makes most sense that midway 90 degrees is straight up??
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 8
Date: Sun, 10 Oct 2010 23:38:12 -0400 (EDT)
From: claryco@xxx.xxx
Subject: [amsat-bb] ND9M Road Trip Update #6
To: amsat-bb@xxxxx.xxx
Message-ID: <8CD370CDD706CC2-1740-2D5C1@xxxxxxxxxxxx.xxxxxx.xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
We'll be leaving the Glacier Nat'l Park vicinity around midday tomorrow (11
Oct) and start heading east. The following plans are tentative, and I'll
update when I can.
Although grid lines are measured linearly, the roads in this area aren't;
mountains and foothills will eat up a lot of the afternoon's drive time.
We're just a very few miles away from the DN28 / DN38 line, but we probably
won't get to DN37 until mid- to late afternoon. The crystal ball puts us on
the DN37 / DN47 line for the AO51 passes that rise locally at about 11/2142Z
(low easterly) and 11/2318Z (high easterly).
On Tuesday (12 Oct), I may still be in DN47 (on US 87) when HO68 comes up,
but I'll try to be on the DN48 / DN58 line for the AO27 passes that rise
locally at about 12/2002Z and 12/2142Z. We'll probably still be in DN58 when
AO51 comes up.
Three days is a lot to forecast, but we'll see about DN56 and DN57 for
Wednesday. More to come...
73,
Jim, ND9M / VQ9JC
Columbia Falls MT / Flathead Co. / DN28
------------------------------
Message: 9
Date: Mon, 11 Oct 2010 05:42:04 +0200
From: "i8cvs" <domenico.i8cvs@xxx.xx>
Subject: [amsat-bb] Re: G-5500 Orientation
To: <dean@xxxxx.xxx>, "AMSAT-BB" <amsat-bb@xxxxx.xxx>
Message-ID: <001401cb68f6$45949500$0201a8c0@xxx.xx>
Content-Type: text/plain; charset="iso-8859-1"
----- Original Message -----
From: "Dean Maluski" <dean@xxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Sent: Sunday, October 10, 2010 7:07 PM
Subject: [amsat-bb] G-5500 Orientation
> I am installing a G-5500 Elevation rotor and trying to determine
> orientation of elevation with reference to software specifically
> rtrcontrold for Linux but I'd suspect this would be typical to most PC
> applications.
> If a sat is 45 degrees above horizon should rotor control read 45 or 135
> degrees on the hardware control dial?
Hi Dean,
If the sat is 45 degrees elevation and rising above the horizon the rotor
control must read 45 degrees.
If your software make flipping operation and the sat is lovering elevation
as soon the elevation is again 45 degrees above the horizon then the control
box must read 135 degrees.
> What I'm asking is when I want to mount antenna where 90 degrees is
> horizontal or vertical?
At 90 degrees elevation the boom must be vertical with the antenna radiating
at the zenith.
> It seems natural that midway point is horizontal but midway point is 90
> degrees. I don't think I ever have a reason to point antenna into the
> mud so it makes most sense that midway 90 degrees is straight up??
>
Right ! midway 90 degrees is straight up with the antenna radiating at the
zenith.
73" de
i8CVS Domenico
------------------------------
Message: 10
Date: Sun, 10 Oct 2010 22:07:14 -0700
From: "Greg D." <ko6th_greg@xxxxxxx.xxx>
Subject: [amsat-bb] Re: G-5500 Orientation
To: <domenico.i8cvs@xxx.xx>, <dean@xxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <BLU133-W7CBB20A82555034F27EC6A9530@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
If you're starting a flipped pass where the satellite AOS is at 45 degrees,
wouldn't the flipped pass start at 45+180=225?
Greg KO6TH
> From: domenico.i8cvs@xxx.xx
> To: dean@xxxxx.xxxx amsat-bb@xxxxx.xxx
> Date: Mon, 11 Oct 2010 05:42:04 +0200
> Subject: [amsat-bb] Re: G-5500 Orientation
>
> ----- Original Message -----
> From: "Dean Maluski" <dean@xxxxx.xxx>
> To: <amsat-bb@xxxxx.xxx>
> Sent: Sunday, October 10, 2010 7:07 PM
> Subject: [amsat-bb] G-5500 Orientation
>
> > I am installing a G-5500 Elevation rotor and trying to determine
> > orientation of elevation with reference to software specifically
> > rtrcontrold for Linux but I'd suspect this would be typical to most PC
> > applications.
>
> > If a sat is 45 degrees above horizon should rotor control read 45 or 135
> > degrees on the hardware control dial?
>
> Hi Dean,
>
> If the sat is 45 degrees elevation and rising above the horizon the rotor
> control must read 45 degrees.
> If your software make flipping operation and the sat is lovering elevation
> as soon the elevation is again 45 degrees above the horizon then the control
> box must read 135 degrees.
>
> > What I'm asking is when I want to mount antenna where 90 degrees is
> > horizontal or vertical?
>
> At 90 degrees elevation the boom must be vertical with the antenna radiating
> at the zenith.
>
> > It seems natural that midway point is horizontal but midway point is 90
> > degrees. I don't think I ever have a reason to point antenna into the
> > mud so it makes most sense that midway 90 degrees is straight up??
> >
>
> Right ! midway 90 degrees is straight up with the antenna radiating at the
> zenith.
>
> 73" de
>
> i8CVS Domenico
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 11
Date: Sun, 10 Oct 2010 23:33:30 -0700
From: "Greg D." <ko6th_greg@xxxxxxx.xxx>
Subject: [amsat-bb] Re: G-5500 Orientation
To: <dean@xxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <BLU133-W29ACA74ACC676FFD97C562A9530@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Dean,
Usually an elevation rotor is mounted so that the antennas are directly
horizontal (zero degrees) when the rotor is positioned at zero. Then the
satellite elevation is the same as the rotor's position. 45 degrees up is,
well, 45 degrees. Straight up is 90.
What others are discussing is a further refinement, where the rotor can
swing past 90 degrees, into what is known as "flipped" operation. For this,
the software and rotor need to both be capable of it, as well as your
installation (watch for tangled cables!). If your Azimuth rotor is mounted
so that it stops at +/- North, then a satellite pass that crosses the line
from North to you will force the rotor to swing clear around when it gets
there. To prevent this 60-second outage, a flipped pass will turn the
antennas on their back and swing them around 180 degrees, effectively giving
you an Azimuth rotor that has its stops aimed South. Then you can work the
satellite through its entire pass.
Hope this helps,
Greg KO6TH
> From: dean@xxxxx.xxx
> To: amsat-bb@xxxxx.xxx
> Date: Sun, 10 Oct 2010 13:07:08 -0400
> Subject: [amsat-bb] G-5500 Orientation
>
> I am installing a G-5500 Elevation rotor and trying to determine
> orientation of elevation with reference to software specifically
> rtrcontrold for Linux but I'd suspect this would be typical to most PC
> applications.
> If a sat is 45 degrees above horizon should rotor control read 45 or 135
> degrees on the hardware control dial?
> What I'm asking is when I want to mount antenna where 90 degrees is
> horizontal or vertical?
> It seems natural that midway point is horizontal but midway point is 90
> degrees. I don't think I ever have a reason to point antenna into the
> mud so it makes most sense that midway 90 degrees is straight up??
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 12
Date: Mon, 11 Oct 2010 13:06:37 +0330
From: <MAHDINEJAD@xxx.xx.xx>
Subject: [amsat-bb] amsat satellites in use
To: amsat-bb@xxxxx.xxx
Message-ID: <1286789797455150500@xxx.xx.xx>
Content-Type: text/plain
Dear amsat member.
I am a university student and research on getting stated with amsat
satellites.
could you please tell me what amsat satellites are in use and i can receive
beacon and telemetry from them?
also How do I can setup a UniTrac 2003 with a G-5500 rotor? Then with Nova?
Thanks for your attention.
Best Regards.
N.Mahdinejad
------------------------------
Message: 13
Date: Mon, 11 Oct 2010 06:15:46 -0500
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
Subject: [amsat-bb] conference
To: <amsat-bb@xxxxx.xxx>
Message-ID: <012a01cb6935$a748cb60$f5da6220$@xxx>
Content-Type: text/plain; charset="us-ascii"
Thanks to all who put on a great conference JoAnn and I had a good time. I
cannot wait to operate ARRIS
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
------------------------------
Message: 14
Date: Mon, 11 Oct 2010 09:06:23 -0400 (GMT-04:00)
From: Andrew Glasbrenner <glasbrenner@xxxxxxxxxx.xxx>
Subject: [amsat-bb] Re: amsat satellites in use
To: MAHDINEJAD@xxx.xx.xxx amsat-bb@xxxxx.xxx
Message-ID:
<31574260.1286802383551.JavaMail.root@xxxxxxxxxxxxxx.xxx.xx.xxxxxxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
For relatively recent status and frequencies, take a look at
http://www.amsat.org/amsat-new/satellites/status.php . I'm not familiar with
the Unitrac interface, but I am familiar enough with Nova to strongly
recommend you avoid it in favor of SatPC32 (
http://www.amsat-na.com/store/item.php?id=100020 ).
What university are you at, and are you working on a cubesat project?
73, Drew KO4MA
AMSAT VP Operations
-----Original Message-----
>From: MAHDINEJAD@xxx.xx.xx
>Sent: Oct 11, 2010 5:36 AM
>To: amsat-bb@xxxxx.xxx
>Subject: [amsat-bb] amsat satellites in use
>
>
>Dear amsat member.
>I am a university student and research on getting stated with amsat
satellites.
>could you please tell me what amsat satellites are in use and i can receive
beacon and telemetry from them?
>also How do I can setup a UniTrac 2003 with a G-5500 rotor? Then with Nova?
>Thanks for your attention.
>Best Regards.
>N.Mahdinejad
>
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 15
Date: Mon, 11 Oct 2010 09:21:20 -0400
From: Michael Wolthuis <wolthui3@xxx.xxx>
Subject: [amsat-bb] Re: amsat satellites in use
To: <MAHDINEJAD@xxx.xx.xx>, "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Message-ID: <C8D88790.2509B%wolthui3@xxx.xxx>
Content-Type: text/plain; charset="US-ASCII"
N.Mhadinejad,
The Unitrac works well with Nova and a g-5500 for my setup. I really like
Nova.
Software for it is here: http://unitrac.webhop.org/
Good info here: http://homepages.paradise.net.nz/lamontd/
A station using Unitrac:
http://www.google.com/url?sa=t&source=web&cd=7&ved=0CDMQFjAG&url=http%3A%2F%
2Fwww.oh1sa.net%2Fdata%2Fsatellite%2FGB4FUN_satsetup.pdf&ei=-A6zTNrQMYPGnAfi
ypn5BQ&usg=AFQjCNFvdoERNpeV4QBVxgKIesbzhxlxPg
If I can help further, please let me know. I use this setup every day.
Mike
kb8zgl
>
> -----Original Message-----
>> From: MAHDINEJAD@xxx.xx.xx
>> Sent: Oct 11, 2010 5:36 AM
>> To: amsat-bb@xxxxx.xxx
>> Subject: [amsat-bb] amsat satellites in use
>>
>>
>> Dear amsat member.
>> I am a university student and research on getting stated with amsat
>> satellites.
>> could you please tell me what amsat satellites are in use and i can receive
>> beacon and telemetry from them?
>> also How do I can setup a UniTrac 2003 with a G-5500 rotor? Then with Nova?
>> Thanks for your attention.
>> Best Regards.
>> N.Mahdinejad
>>
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 16
Date: Mon, 11 Oct 2010 09:32:57 -0400
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
Subject: [amsat-bb] AO-51 mode: dual repeaters (to support JOTA)
To: Amsat - BBS <amsat-bb@xxxxx.xxx>
Message-ID:
<AANLkTi=bPiyeUXVGp35QpA2K9zR6GsMeXXMHm2V+U4tL@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=windows-1252
Hello All,
Thanks to Kevin WA6FAF we are now running dual repeaters on AO-51, as
per the schedule below. The 145.880/435.150 repeater is for QRP
operations only --unless-- you are contacting a Scout station during
the Jamboree On The Air (JOTA) this weekend.
The early part of this week is a GREAT time for new and/or
inexperienced operators with simple/portable gear to make some
contacts on the QRP repeater! Some hams are reluctant to attempt
contacts because of the normally fast pace on 435.300, so here is a
chance for folks to make some contacts they might otherwise not even
attempt...
Encourage people to make use of this mode--both for QRP and for JOTA!!!
Operators on the East coast can expect some early morning
interruptions on 435.150 while we download telemetry.
AO-51 Schedule
October 10 (late UTC)
FM Repeater, V/U
Uplink: 145.920 MHz FM (no PL tone)
Downlink: 435.300 MHz FM
QRP (Oct. 10-15) and JOTA (Oct. 16-17) Only FM Repeater, V/U
Please give way to JOTA stations or QSO?s with JOTA stations
Uplink: 145.880 MHz FM (no PL tone)
Downlink: 435.150 MHz FM
73,
--
Mark L. Hammond [N8MH]
------------------------------
Message: 17
Date: Mon, 11 Oct 2010 11:45:52 -0300
From: "Pedro Converso" <lu7abf@xxxxx.xxx.xx>
Subject: [amsat-bb] NO-44 Pcsat-11 is alive !
To: <amsat-bb@xxxxx.xxx>
Message-ID: <128680835279528268@xxxx>
Content-Type: text/plain; charset="us-ascii"
NO-44 heard and operated from South America.
Fm W3ADO-1 To BEACON Via SGATE <UI pid=F0 Len=42 >[06:07:00]
T#010,075,095,090,084,214,11111111,0001,1
Fm LU2HAM-7 To APRS Via ARISS,RS0ISS-4,WIDE3-3 <UI pid=F0 Len=60 >[06:07:51]
=3120.48S/06418.04W`Sat Gate H-24 Cordoba Argentina {UISS52}
You can track & report daily sats operation in http://amsat.org.ar?f=z
73, LU7ABF, Pedro Converso
Lu7abf@xxxxx.xxx.xx
www.amsat.org.ar
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 5, Issue 409
****************************************
Read previous mail | Read next mail
| |
