| |
CX2SA > SATDIG 11.04.10 20:06l 329 Lines 9207 Bytes #999 (0) @ WW
BID : AMSATBB5160
Read: GUEST
Subj: AMSAT-BB-digest V5 160
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<HS1LMV<CX2SA
Sent: 100411/1904Z @:CX2SA.LAV.URY.SA #:52379 [Minas] FBB7.00e $:AMSATBB5160
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Moon (Jack Barbera)
2. Re: AO-51 power up, PL test tomorrow (Andre' v Deventer)
3. Re: Moon (Dave Webb KB1PVH)
4. Re: Moon (Jari Koivurinne)
5. SSB 70cm Pre AMp (Peter Wilson)
6. FW: Remarks (ps8rf Piraja)
7. Re: SSB 70cm Pre AMp (Anthony Monteiro)
8. Re: SSB 70cm Pre AMp (Art McBride)
9. TH-F6A/programing (Bob- W7LRD)
----------------------------------------------------------------------
Message: 1
Date: Sun, 11 Apr 2010 10:11:27 -0700 (PDT)
From: Jack Barbera <barberaalderwood@xxxxx.xxx>
Subject: [amsat-bb] Moon
To: amsat-bb@xxxxx.xxx
Message-ID: <457566.52825.qm@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Little help.
Where in SAT32 do I look for SuM for moon tracking.
Also looking for suggestions as to the best way to record SAT contact from
head set out put using sat 32 and a 910 radio.
Thanks
?Jack WA1ZDV
------------------------------
Message: 2
Date: Sun, 11 Apr 2010 19:14:04 +0200
From: "Andre' v Deventer" <vandeventeraj@xxxxxxxx.xxx>
Subject: [amsat-bb] Re: AO-51 power up, PL test tomorrow
To: "Amsat-Bb" <amsat-bb@xxxxx.xxx>
Message-ID: <NHEDJLNPLJCJMJDIBPGKOEKPCCAA.vandeventeraj@xxxxxxxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Drew,
On our clear pass south to north into ZS, at 16h07 utc, the bird was off
and switched on with tone.
Stayed on for 120 secs after PPT recycled. Goes off even though a tone
station is busy.
Works just fine ! Nice to have the higher power output from the bird.
I presume this mode will save some power in swithing TX off ?
73
andre
zs2bk
------------------------------
Message: 3
Date: Sun, 11 Apr 2010 13:32:31 -0400
From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
Subject: [amsat-bb] Re: Moon
To: Jack Barbera <barberaalderwood@xxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Message-ID:
<w2g4be5f191004111032j4d04cbfcxe8bbd6e1ca1883a7@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Jack,
You can find it in your programs list. Click on SatPC32, then select SuM out
of the list.
Dave - KB1PVH
Sent from my Verizon Wireless DROID
On Apr 11, 2010 1:25 PM, "Jack Barbera" <barberaalderwood@xxxxx.xxx> wrote:
Little help.
Where in SAT32 do I look for SuM for moon tracking.
Also looking for suggestions as to the best way to record SAT contact from
head set out put using sat 32 and a 910 radio.
Thanks
Jack WA1ZDV
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 4
Date: Sun, 11 Apr 2010 17:35:31 -0000
From: "Jari Koivurinne" <jari.koivurinne@xxxx.xxx>
Subject: [amsat-bb] Re: Moon
To: "Jack Barbera" <barberaalderwood@xxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Message-ID: <ELENKCKBGJGJDOPPNPOGMENMEKAA.jari.koivurinne@xxxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
>
> Little help.
> Where in SAT32 do I look for SuM for moon tracking.
> Also looking for suggestions as to the best way to record SAT
> contact from head set out put using sat 32 and a 910 radio.
> Thanks
> ?Jack WA1ZDV
In Orbitron there is selection TARGET. Choose there MOON.
-jari oh3uw
------------------------------
Message: 5
Date: Sun, 11 Apr 2010 18:51:25 +0100
From: "Peter Wilson" <peterjohn.wilson@xxxxxxxx.xxx>
Subject: [amsat-bb] SSB 70cm Pre AMp
To: "Amsat BB" <amsat-bb@xxxxx.xxx>
Message-ID: <002e01cad99f$9c6ce490$0702a8c0@xxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Everyone,
Just set up my station and started to receive all the main satellites, using
a Gulf satellite antenna (2M + 70cm) + SSB 70cm Preamp and FT736R
When I transmit on 2M, especially FM, it's as if the preamp is squelching -
the receive signal reduces significantly. If I turn the preamp off I don't
get the problem, I can continue to hear the received signal.
Any ideas?
Peter Wilson
G8KEK
AMSAT UK 6897
------------------------------
Message: 6
Date: Sun, 11 Apr 2010 20:51:29 +0300
From: ps8rf Piraja <ps8rf@xxxxxxx.xxx>
Subject: [amsat-bb] FW: Remarks
To: <amsat-bb@xxxxx.xxx>
Message-ID: <SNT121-W40BBE87B3A3217C25F188FE0130@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Hello Luc Leblanc,
Yes, the signals received by Roland, PY4ZBZ demonstrate in practice the
article by Domenico, I8CVS.
As for the PLL tone in AO-51 you're right. It's just to save the use of
AO-51 when we're not using it.
Thanks for reply
Piraja, PS8RF
The Amateur Radio is supportive and helpful in any circumstance.
_________________________________________________________________
Mude seu visual no Messenger e divirta-se com seus amigos online. Clique e
veja como
http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline
------------------------------
Message: 7
Date: Sun, 11 Apr 2010 14:02:13 -0400
From: Anthony Monteiro <aa2tx@xxxxxxx.xxx>
Subject: [amsat-bb] Re: SSB 70cm Pre AMp
To: "Peter Wilson" <peterjohn.wilson@xxxxxxxx.xxx>, "Amsat BB"
<amsat-bb@xxxxx.xxx>
Message-ID: <201004111802.o3BI2Hhv025006@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed
Hi Peter,
Your preamp is overloading. See this article:
<http://www.amsat.org/amsat-new/articles/Mode-J/>http://www.amsat.org/amsat-ne
w/articles/Mode-J/
73,
Tony AA2TX
---
At 01:51 PM 4/11/2010, Peter Wilson wrote:
>Hi Everyone,
>
>Just set up my station and started to receive all the main
>satellites, using a Gulf satellite antenna (2M + 70cm) + SSB 70cm
>Preamp and FT736R
>
>When I transmit on 2M, especially FM, it's as if the preamp is
>squelching - the receive signal reduces significantly. If I turn the
>preamp off I don't get the problem, I can continue to hear the received
signal.
>
>Any ideas?
>
>Peter Wilson
>G8KEK
>AMSAT UK 6897
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 8
Date: Sun, 11 Apr 2010 11:26:36 -0700
From: "Art McBride" <kc6uqh@xxx.xxx>
Subject: [amsat-bb] Re: SSB 70cm Pre AMp
To: "'Peter Wilson'" <peterjohn.wilson@xxxxxxxx.xxx>, "'Amsat BB'"
<amsat-bb@xxxxx.xxx>
Message-ID: <703D4D6B24404BD3AE3BB4CE27A98C43@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
Peter,
Signal from your transmitter is de-sensing your preamp. It could be 2 Meter,
white noise, or 3 harmonic. The third harmonic could come from the
transmitter or it could be made by corrosion on the antenna connections.
I suggest you check all elements and their connections including the antenna
connectors first. Next step is to make or by filters or try a diplexer. If
you make your own filters start with the RSGB VHF/UHF Manual I has great
ideas and practical information for construction of all types of electronics
including filters.
Art,
KC6UQH
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Peter Wilson
Sent: Sunday, April 11, 2010 10:51 AM
To: Amsat BB
Subject: [amsat-bb] SSB 70cm Pre AMp
Hi Everyone,
Just set up my station and started to receive all the main satellites, using
a Gulf satellite antenna (2M + 70cm) + SSB 70cm Preamp and FT736R
When I transmit on 2M, especially FM, it's as if the preamp is squelching -
the receive signal reduces significantly. If I turn the preamp off I don't
get the problem, I can continue to hear the received signal.
Any ideas?
Peter Wilson
G8KEK
AMSAT UK 6897
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5018 (20100411) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5018 (20100411) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
------------------------------
Message: 9
Date: Sun, 11 Apr 2010 18:57:29 +0000 (UTC)
From: Bob- W7LRD <w7lrd@xxxxxxx.xxx>
Subject: [amsat-bb] TH-F6A/programing
To: amsat-bb@xxxxx.xxx
Message-ID:
<696311400.4551671271012249913.JavaMail.root@xxxxxxx.xxxxxxxxxx.xx.xxxx.xxxxxx
x.xxx>
Content-Type: text/plain; charset=utf-8
Anyone have any experience programing the F6A handheld with a pc.? I have
the cable etc.? Can't figure it out.? Contact direct. Thanks
73 Bob W7LRD
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 5, Issue 160
****************************************
Read previous mail | Read next mail
| |
