| |
CX2SA > SATDIG 26.03.10 21:04l 133 Lines 3257 Bytes #999 (0) @ WW
BID : AMSATBB5137
Read: GUEST
Subj: AMSAT-BB-digest V5 137
Path: IZ3LSV<IW0QNL<F4BWT<F1BBI<CX2SA
Sent: 100326/1903Z @:CX2SA.LAV.URY.SA #:48593 [Minas] FBB7.00e $:AMSATBB5137
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: AO-51 L band frq (i8cvs)
2. Re: AO-51 L band frq (John Neeley)
----------------------------------------------------------------------
Message: 1
Date: Fri, 26 Mar 2010 18:40:13 +0100
From: "i8cvs" <domenico.i8cvs@xxx.xx>
Subject: [amsat-bb] Re: AO-51 L band frq
To: "Luc Leblanc" <lucleblanc6@xxxxxxxxx.xx>, "AMSAT-BB"
<amsat-bb@xxxxx.xxx>
Message-ID: <005901cacd0b$63bf5ba0$0201a8c0@xxx.xx>
Content-Type: text/plain; charset="iso-8859-1"
----- Original Message -----
From: "Luc Leblanc" <lucleblanc6@xxxxxxxxx.xx>
To: <amsat-bb@xxxxx.xxx>
Sent: Friday, March 26, 2010 12:24 PM
Subject: [amsat-bb] AO-51 L band frq
> I was able to find some time yesterday to repair my L band DEM linear
> always the same issues with the N type
> connector solder tab on the board who break if the coax is putting some
> stress on the center pin.
> Luc Leblanc VE2DWE
> Skype VE2DWE
> www.qsl.net/ve2dwe
> DSTAR urcall VE2DWE
> WAC BASIC CW PHONE SATELLITE
Hi Luc, VE2DWE
To solve the above problem you must use a "captivated" N female connector in
wich the central pin is NOT alloved to move under pression while pushing the
central pin of the N male connector.
Best 73" de
i8CVS Domenico
------------------------------
Message: 2
Date: Fri, 26 Mar 2010 11:34:05 -0700 (PDT)
From: John Neeley <w6zkh@xxx.xxx>
Subject: [amsat-bb] Re: AO-51 L band frq
To: i8cvs <domenico.i8cvs@xxx.xx>, Luc Leblanc
<lucleblanc6@xxxxxxxxx.xx>, AMSAT-BB <amsat-bb@xxxxx.xxx>
Message-ID: <51481.83519.qm@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
That's a good one, Dom
________________________________
From: i8cvs <domenico.i8cvs@xxx.xx>
To: Luc Leblanc <lucleblanc6@xxxxxxxxx.xx>; AMSAT-BB <amsat-bb@xxxxx.xxx>
Sent: Fri, March 26, 2010 10:40:13 AM
Subject: [amsat-bb] Re: AO-51 L band frq
----- Original Message -----
From: "Luc Leblanc" <lucleblanc6@xxxxxxxxx.xx>
To: <amsat-bb@xxxxx.xxx>
Sent: Friday, March 26, 2010 12:24 PM
Subject: [amsat-bb] AO-51 L band frq
> I was able to find some time yesterday to repair my L band DEM linear
> always the same issues with the N type
> connector solder tab on the board who break if the coax is putting some
> stress on the center pin.
> Luc Leblanc VE2DWE
> Skype VE2DWE
> www.qsl.net/ve2dwe
> DSTAR urcall VE2DWE
> WAC BASIC CW PHONE SATELLITE
Hi Luc, VE2DWE
To solve the above problem you must use a "captivated" N female connector in
wich the central pin is NOT alloved to move under pression while pushing the
central pin of the N male connector.
Best 73" de
i8CVS Domenico
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 5, Issue 137
****************************************
Read previous mail | Read next mail
| |
