| |
CX2SA > SATDIG 05.01.10 22:04l 800 Lines 24024 Bytes #999 (0) @ WW
BID : AMSATBB58
Read: GUEST
Subj: AMSAT-BB-digest V5 8
Path: IZ3LSV<IK2XDE<PY1AYH<F4BWT<F1BBI<CX2SA
Sent: 100105/2003Z @:CX2SA.LAV.URY.SA #:30574 [Minas] FBB7.00e $:AMSATBB58
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. SVHFS Conference Call For Papers (Robin Midgett)
2. AO-7 DX (Bob- W7LRD)
3. Re: Question for non-US satellite ops... (Andrew Rich)
4. Re: Question for non-US satellite ops... (w6zkh@xxxxxxx.xxxx
5. Re: Replacing the 3SK121 in my ag-35 (Luc Leblanc)
6. Looking for 435mhz transverter... (KG0MW-Chad Phillips)
7. help (w3vvp)
8. OSCAR Station (Daniel D.Tassell)
9. Re: help (Andrew Rich)
10. FT-736R subaudio tone (Erich Eichmann)
11. Re: help (Andrew Glasbrenner)
12. Re: Looking for 435mhz transverter... (Alan P. Biddle)
13. Re: Looking for 435mhz transverter... (Mike Rupprecht)
14. Re: help (Ben Jackson)
15. Re: help (Howard Kowall)
16. Re: help (Howard Kowall)
----------------------------------------------------------------------
Message: 1
Date: Mon, 04 Jan 2010 14:52:29 -0600
From: Robin Midgett <K4IDC@xxxxxxx.xxx>
Subject: [amsat-bb] SVHFS Conference Call For Papers
To: amsat-bb@xxxxx.xxx
Message-ID: <6.2.5.6.2.20100104145223.028c3e50@xxxxxxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"; format=flowed
Call for Papers 14th Annual Southeastern VHF
Society Conference April 23rd and 24th, 2010
Morehead State University in Morehead, Kentucky
The Southeastern VHF Society is calling for the
submission of papers and presentations for the
upcoming 14th Annual Southeastern VHF Society
Conference to be held at Morehead State
Univeristy in Morehead, KY on April 23rd and
24th, 2010. Papers and presentations are
solicited on both the technical and operational
aspects of VHF, UHF and Microwave weak signal
amateur radio. Some suggested areas of interest are:
Transmitters
Receivers
Transverters
RF Power Amplifiers
RF Low Noise Pre Amplifiers
Antennas
Construction Projects
Test Equipment And Station Accessories
Station Design And Construction
Contesting
Roving
DXpeditions
EME
Propagation (Sporadic E, Meteor Scatter, Troposphere Ducting, etc.)
Digital Modes (WSJT, etc.)
Digital Signal Processing (DSP)
Software Defined Radio (SDR)
Amateur Satellites Amateur Television
In general papers and presentations on non weak
signal related topics such as FM repeaters and
packet will not be accepted but exceptions may be
made if the topic is related to weak signal. For
example, a paper or presentation on the use of
APRS to track rovers during contests would be considered.
The deadline for the submission of papers and
presentations is February 5, 2010. All
submissions for the proceedings should be in
Microsoft Word (.doc). Submissions for
presentation at the conference should be in
PowerPoint (.ppt) format, and delivered on either
a USB memory stick or CDROM or posted for
download on a web site of your choice.
Pages are 8 and 1/2 by 11 inches with a 1 inch
margin on the bottom and ? inch margin on the
other three sides. All text, drawings, photos,
etc. should be black and white only (no color).
Please indicate when you submit your paper or
presentation if you plan to attend the conference
and present there or if you are submitting just
for publication. Papers and presentations will be
published in bound proceedings by the ARRL. Send
all questions, comments and submissions to the
program chair, Robin Midgett K4IDC via K4IDC at comcast dot net.
For further information about the conference
please go to <http://www.svhfs.org>www.svhfs.org
Thank you,
Robin Midgett K4IDC
2010 Program Chair, SVHFS
------------------------------
Message: 2
Date: Mon, 4 Jan 2010 21:12:33 +0000 (UTC)
From: Bob- W7LRD <w7lrd@xxxxxxx.xxx>
Subject: [amsat-bb] AO-7 DX
To: amsat-bb@xxxxx.xxx
Message-ID:
<1973370566.7175951262639553551.JavaMail.root@xxxxxxx.xxxxxxxxxx.xx.xxxx.xxxxx
xx.xxx>
Content-Type: text/plain; charset=utf-8
I copied 2E1EUB and MM5AJW on the latest AO-7 pass.? Was not quick enough on
the return etc to get them.? First time I heard anything other that
Mika-OH8MBN.? So you European stations help me to streeeeeetch the footprint.
73 Bob W7LRD
Seattle, Wa.
CN87wk
------------------------------
Message: 3
Date: Tue, 5 Jan 2010 07:53:34 +1000
From: "Andrew Rich" <vk4tec@xxxxxxxxxxxxx.xxx>
Subject: [amsat-bb] Re: Question for non-US satellite ops...
To: "Elan Portnoy" <elanportnoy@xxxxx.xxx>, "AMSAT-BB"
<amsat-bb@xxxxx.xxx>
Message-ID: <179127072FC34B468ABE45FDC98DBB8E@xxxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
we speak australian
----- Original Message -----
From: "Elan Portnoy" <elanportnoy@xxxxx.xxx>
To: "AMSAT-BB" <amsat-bb@xxxxx.xxx>
Sent: Tuesday, January 05, 2010 4:43 AM
Subject: [amsat-bb] Question for non-US satellite ops...
> When footprints cover multiple countries at the same time, do you speak
> English, or local language to stations in your country?
>
> Elan - WB2IOL
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.431 / Virus Database: 270.14.124/2598 - Release Date: 01/03/10
09:41:00
------------------------------
Message: 4
Date: Mon, 4 Jan 2010 23:44:03 +0000 (UTC)
From: w6zkh@xxxxxxx.xxx
Subject: [amsat-bb] Re: Question for non-US satellite ops...
To: Andrew Rich <vk4tec@xxxxxxxxxxxxx.xxx>
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Message-ID:
<1453021279.5884731262648643019.JavaMail.root@xxxxxxx.xxxxxxxxxxx.xx.xxxx.xxxx
xxx.xxx>
Content-Type: text/plain; charset=utf-8
Andrew, the only Australian I know is, "G-Day Mate" and I'm still not sure
what it means, hi.
John
----- Original Message -----
From: "Andrew Rich" <vk4tec@xxxxxxxxxxxxx.xxx>
To: "Elan Portnoy" <elanportnoy@xxxxx.xxx>, "AMSAT-BB" <amsat-bb@xxxxx.xxx>
Sent: Monday, January 4, 2010 1:53:34 PM GMT -08:00 US/Canada Pacific
Subject: [amsat-bb] Re: Question for non-US satellite ops...
we speak australian
----- Original Message -----
From: "Elan Portnoy" <elanportnoy@xxxxx.xxx>
To: "AMSAT-BB" <amsat-bb@xxxxx.xxx>
Sent: Tuesday, January 05, 2010 4:43 AM
Subject: [amsat-bb] Question for non-US satellite ops...
> When footprints cover multiple countries at the same time, do you speak
> English, or local language to stations in your country?
>
> Elan - WB2IOL
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.431 / Virus Database: 270.14.124/2598 - Release Date: 01/03/10
09:41:00
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Mon, 04 Jan 2010 13:58:24 -0500
From: Luc Leblanc <lucleblanc6@xxxxxxxxx.xx>
Subject: [amsat-bb] Re: Replacing the 3SK121 in my ag-35
To: amsat-bb@xxxxx.xxx
Cc: Yokshs <yokshs@xxxxxxxxx.xxx>
Message-ID: <4B41F400.6197.1365782@xxxxxxxxxxx.xxxxxxxxx.xx>
Content-Type: text/plain; charset=US-ASCII
On 4 Jan 2010 at 10:33, Yokshs wrote:
Date sent: Mon, 04 Jan 2010 10:33:27 -0600
From: Yokshs <yokshs@xxxxxxxxx.xxx>
Subject: [amsat-bb] Replacing the 3SK121 in my ag-35
To: Amsat BB <amsat-bb@xxxxx.xxx>
> Hello,
>
> Happy New Year to all on the list!
>
> I've got a replacement 3SK121 for my AG-35, and I'm looking for suggestions
> on how to replace it? The relay coil is mounted very close. I'm curious if
> anyone else has managed to replace the FET without removing the relay?
>
> Thanks for any suggestions.
>
> 73.
>
> Kyle
> K0KN
>
> _______________________________________________
Hi Kyle
I change one in my AG-35 just cut the legs of the fried one as close to the
casing possible then just solder the new one over the legs
already solder to the board. To avoid over-heating the coil relay just put a
piece of insulating material over the coil i put a small piece
of teflon. There is only one leg too close to the coil relay. You should
have a steady hand and a magnifier with a lamp it help to avoid
messing with your pen iron throwing melted solder all around the place.
It works for me just hope it will work for you.
"-"
Luc Leblanc VE2DWE
Skype VE2DWE
www.qsl.net/ve2dwe
DSTAR urcall VE2DWE
WAC BASIC CW PHONE SATELLITE
------------------------------
Message: 6
Date: Mon, 4 Jan 2010 18:44:47 -0600
From: KG0MW-Chad Phillips <kg0mw@xxxxxxxxxxxxxxxxxxxxxx.xxx>
Subject: [amsat-bb] Looking for 435mhz transverter...
To: AMSAT-BB@xxxxx.xxx
Message-ID:
<AA17D7C6-780F-4857-B56B-868107467286@xxxxxxxxxxxxxxxxxxxxxx.xxx>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Sometime ago I owned a Hamtronics 435mhz downconverter. Looking for
something similar again and not having much luck finding one. Got any
ideas where I can find one wired or in kit form?
thanks,
Chad
kg0mw
------------------------------
Message: 7
Date: Mon, 4 Jan 2010 22:37:37 -0500
From: "w3vvp" <w3vvp@xxxxxxxxxx.xxx>
Subject: [amsat-bb] help
To: "amsat-bb" <amsat-bb@xxxxx.xxx>
Message-ID: <0E2AB78CE375433E87B55AD5CCC6F67F@xxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm.
The foot print of Satpc32 showed all US.What am I doing wrong, I have
downloaded latest keps. George
------------------------------
Message: 8
Date: Mon, 04 Jan 2010 21:38:57 -0600
From: "Daniel D.Tassell" <dtassell@xxxxxxxxx.xxx>
Subject: [amsat-bb] OSCAR Station
To: amsat-bb@xxxxx.xxx
Message-ID: <749146.99613.qm@xxxxxxx.xxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed
Good Evening and Happy New Year to all!
I purchased this OSCAR station about 6 months ago and can't get
interested in it so I want to offer it to some folks that are. This
is a package deal and I will not separate it
This station comes with the following,
Icom IC-821H with box, mic, manual and power cord
Yaesu G-5400 Rotator and control box
SASI Sat Tracker Interface for G-5400
M2 2MCP14 with new mast clamps
M2 436CP30 with new mast clamps
2m Landweir Preamp
70cm Landweir Preamp
$800 cash takes it all. Price is firm as I purchased new clamps for
the antennas and had to repair the 2m preamp. The station is up and
running so it can be checked out before taking down. Of course this
is a pick up offer only. Any interested parties can drop me an
e-mail for pictures.
Dan KC5PCB
------------------------------
Message: 9
Date: Tue, 5 Jan 2010 15:31:26 +1000
From: "Andrew Rich" <vk4tec@xxxxxxxxxxxxx.xxx>
Subject: [amsat-bb] Re: help
To: "w3vvp" <w3vvp@xxxxxxxxxx.xxx>, "amsat-bb" <amsat-bb@xxxxx.xxx>
Message-ID: <4078613A4FE143098A320DE4E4E0EA48@xxxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
wrong hobby
----- Original Message -----
From: "w3vvp" <w3vvp@xxxxxxxxxx.xxx>
To: "amsat-bb" <amsat-bb@xxxxx.xxx>
Sent: Tuesday, January 05, 2010 1:37 PM
Subject: [amsat-bb] help
> On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm.
> The foot print of Satpc32 showed all US.What am I doing wrong, I have
> downloaded latest keps. George
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 270.14.125/2600 - Release Date: 01/04/10
19:35:00
------------------------------
Message: 10
Date: Tue, 5 Jan 2010 12:26:26 +0100
From: "Erich Eichmann" <erich.eichmann@xxxxxxxx.xx>
Subject: [amsat-bb] FT-736R subaudio tone
To: <AMSAT-BB@xxxxx.xxx>
Message-ID: <C35ECF0957C1424D94D69FE3B564D9C7@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
Hello,
does somebody steer his FT-736R with SatPC32 , in particular the subaudio
tone functions of the radio?
I want to answer an inquiry, but can't test that practically because I don't
have the Ctcss unit FTS-8 for my FT-736R.
Many thanks,
73s, Erich, DK1TB
------------------------------
Message: 11
Date: Tue, 05 Jan 2010 07:48:17 -0500
From: Andrew Glasbrenner <glasbrenner@xxxxxxxxxx.xxx>
Subject: [amsat-bb] Re: help
To: w3vvp <w3vvp@xxxxxxxxxx.xxx>
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Message-ID: <4B433511.2070607@xxxxxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
w3vvp wrote:
> On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm.
> The foot print of Satpc32 showed all US.What am I doing wrong, I have
> downloaded latest keps. George
>
>
Take a look at the schedule at http://www.camsat.cn/index.php?lang=en .
Unless you were listening for the CW beacon, which is very strong, there
was nothing to hear.
73, Drew KO4MA
------------------------------
Message: 12
Date: Tue, 5 Jan 2010 08:45:51 -0600
From: "Alan P. Biddle" <APBIDDLE@xxxxxx.xxx>
Subject: [amsat-bb] Re: Looking for 435mhz transverter...
To: "'KG0MW-Chad Phillips'" <kg0mw@xxxxxxxxxxxxxxxxxxxxxx.xxx>,
<AMSAT-BB@xxxxx.xxx>
Message-ID: <02DD524C8D954726B2D2F2AD21BDBDA9@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
Chad,
Take a look here: http://www.hsmicrowave.com/html/70_cm.html
A bit more expensive than Hamtronics, but also much better built.
Full disclosure: The company owner is an active member of AMSAT, and
someone I know. No financial association on my part. Just good stuff.
Alan
WA4SCA
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of KG0MW-Chad Phillips
Sent: 04 January, 2010 18:45
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] Looking for 435mhz transverter...
Sometime ago I owned a Hamtronics 435mhz downconverter. Looking for
something similar again and not having much luck finding one. Got any
ideas where I can find one wired or in kit form?
thanks,
Chad
kg0mw
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 13
Date: Tue, 5 Jan 2010 16:17:25 +0100
From: "Mike Rupprecht" <mail@xxxxxxxxxxxxxx.xx>
Subject: [amsat-bb] Re: Looking for 435mhz transverter...
To: <APBIDDLE@xxxxxxx.xxx>, "'KG0MW-Chad Phillips'"
<kg0mw@xxxxxxxxxxxxxxxxxxxxxx.xxx>, <AMSAT-BB@xxxxx.xxx>
Message-ID: <008401ca8e1a$2fdbd370$8f937a50$@xx>
Content-Type: text/plain; charset="iso-8859-1"
... but worth every penny.
I use this converter with my SDR-IQ and am very satisfied!
In addition, an excellent service from Bill.
http://www.dk3wn.info/digital.shtml
(sorry it's in german)
73, Mike
DK3WN
-----Urspr?ngliche Nachricht-----
Von: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx Im
Auftrag von Alan P. Biddle
Gesendet: Dienstag, 5. Januar 2010 15:46
An: 'KG0MW-Chad Phillips'; AMSAT-BB@xxxxx.xxx
Betreff: [amsat-bb] Re: Looking for 435mhz transverter...
Chad,
Take a look here: http://www.hsmicrowave.com/html/70_cm.html
A bit more expensive than Hamtronics, but also much better built.
Full disclosure: The company owner is an active member of AMSAT, and
someone I know. No financial association on my part. Just good stuff.
Alan
WA4SCA
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of KG0MW-Chad Phillips
Sent: 04 January, 2010 18:45
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] Looking for 435mhz transverter...
Sometime ago I owned a Hamtronics 435mhz downconverter. Looking for
something similar again and not having much luck finding one. Got any
ideas where I can find one wired or in kit form?
thanks,
Chad
kg0mw
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 14
Date: Tue, 05 Jan 2010 10:36:02 -0500
From: Ben Jackson <bbj@xxxxxxxx.xxx>
Subject: [amsat-bb] Re: help
To: Andrew Rich <vk4tec@xxxxxxxxxxxxx.xxx>
Cc: amsat-bb <amsat-bb@xxxxx.xxx>, w3vvp <w3vvp@xxxxxxxxxx.xxx>
Message-ID: <4B435C62.2050708@xxxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Andrew Rich wrote:
> wrong hobby
Says the man who spams APRSSIG with off-topic programming questions that
can be answered with a few Google searches. If you have nothing
constructive to say, don't reply. In conclusion, please pull your bottom
lip over your head and swallow.
Ah, the felt good.
Now, George:
> On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm.
> The foot print of Satpc32 showed all US.What am I doing wrong, I have
> downloaded latest keps. George
As Drew stated, the FM and transponder are not always on all the time,
but the CW beacon should always be going. I have no idea about your
skill level, so let me suggest basics:
* Are you sure you're on the right frequency?
* Are you compensating for doppler?
* Everything connected correctly?
* Can you hear other sats?
Hope this helps and that's it something simple.
~Ben
--
Ben Jackson - N1WBV - New Bedford, MA
bbj <at> innismir.net - http://www.innismir.net/
------------------------------
Message: 15
Date: Tue, 5 Jan 2010 10:04:50 -0600
From: "Howard Kowall" <hkowall@xxxx.xx>
Subject: [amsat-bb] Re: help
To: "AMSAT-BB@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Message-ID: <003c01ca8e20$cf902af0$6701a8c0@xxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Good Morning
Also the schedule of HO-68 can be seen at the following link
http://www.camsat.cn/
At this link you can see when and which mode is active (Time is in UTC)
So far I have herd nothing also ( lol)
But I did not listen for the beacon,which I will do on the next path 16:05
utc,Should be over North America
I hope this helps a little and that I am correct
Good Luck
Howard
VE4ISP
----- Original Message -----
From: "Ben Jackson" <bbj@xxxxxxxx.xxx>
To: "Andrew Rich" <vk4tec@xxxxxxxxxxxxx.xxx>
Cc: "amsat-bb" <amsat-bb@xxxxx.xxx>; "w3vvp" <w3vvp@xxxxxxxxxx.xxx>
Sent: Tuesday, January 05, 2010 9:36 AM
Subject: [amsat-bb] Re: help
> Andrew Rich wrote:
>> wrong hobby
>
> Says the man who spams APRSSIG with off-topic programming questions that
> can be answered with a few Google searches. If you have nothing
> constructive to say, don't reply. In conclusion, please pull your bottom
> lip over your head and swallow.
>
> Ah, the felt good.
>
> Now, George:
>
>> On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or fm.
>> The foot print of Satpc32 showed all US.What am I doing wrong, I have
>> downloaded latest keps. George
>
> As Drew stated, the FM and transponder are not always on all the time,
> but the CW beacon should always be going. I have no idea about your
> skill level, so let me suggest basics:
>
> * Are you sure you're on the right frequency?
> * Are you compensating for doppler?
> * Everything connected correctly?
> * Can you hear other sats?
>
> Hope this helps and that's it something simple.
>
> ~Ben
>
> --
> Ben Jackson - N1WBV - New Bedford, MA
> bbj <at> innismir.net - http://www.innismir.net/
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 16
Date: Tue, 5 Jan 2010 10:14:19 -0600
From: "Howard Kowall" <hkowall@xxxx.xx>
Subject: [amsat-bb] Re: help
To: "AMSAT-BB@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Message-ID: <004901ca8e22$22f2f320$6701a8c0@xxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
May have made an error on the AOS time
I had 1st wrote 16:05 utc
I believe it should be 16:29 utc
For my location
Howard
VE4ISP
----- Original Message -----
From: "Howard Kowall" <hkowall@xxxx.xx>
To: "AMSAT-BB@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Sent: Tuesday, January 05, 2010 10:04 AM
Subject: [amsat-bb] Re: help
> Good Morning
> Also the schedule of HO-68 can be seen at the following link
> http://www.camsat.cn/
> At this link you can see when and which mode is active (Time is in UTC)
> So far I have herd nothing also ( lol)
> But I did not listen for the beacon,which I will do on the next path 16:05
> utc,Should be over North America
> I hope this helps a little and that I am correct
> Good Luck
> Howard
> VE4ISP
>
>
> ----- Original Message -----
> From: "Ben Jackson" <bbj@xxxxxxxx.xxx>
> To: "Andrew Rich" <vk4tec@xxxxxxxxxxxxx.xxx>
> Cc: "amsat-bb" <amsat-bb@xxxxx.xxx>; "w3vvp" <w3vvp@xxxxxxxxxx.xxx>
> Sent: Tuesday, January 05, 2010 9:36 AM
> Subject: [amsat-bb] Re: help
>
>
>> Andrew Rich wrote:
>>> wrong hobby
>>
>> Says the man who spams APRSSIG with off-topic programming questions that
>> can be answered with a few Google searches. If you have nothing
>> constructive to say, don't reply. In conclusion, please pull your bottom
>> lip over your head and swallow.
>>
>> Ah, the felt good.
>>
>> Now, George:
>>
>>> On this last pass of HO-68 at 2216 L AOS I heard nothing on ssb,cw or
>>> fm.
>>> The foot print of Satpc32 showed all US.What am I doing wrong, I have
>>> downloaded latest keps. George
>>
>> As Drew stated, the FM and transponder are not always on all the time,
>> but the CW beacon should always be going. I have no idea about your
>> skill level, so let me suggest basics:
>>
>> * Are you sure you're on the right frequency?
>> * Are you compensating for doppler?
>> * Everything connected correctly?
>> * Can you hear other sats?
>>
>> Hope this helps and that's it something simple.
>>
>> ~Ben
>>
>> --
>> Ben Jackson - N1WBV - New Bedford, MA
>> bbj <at> innismir.net - http://www.innismir.net/
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 5, Issue 8
**************************************
Read previous mail | Read next mail
| |
