| |
CX2SA > SATDIG 12.10.09 22:07l 59 Lines 1608 Bytes #999 (0) @ WW
BID : AMSATBB4529
Read: GUEST
Subj: AMSAT-BB-digest V4 529
Path: IZ3LSV<IK2XDE<DB0RES<DK0WUE<SP7MGD<VE2PKT<F1BBI<CX2SA
Sent: 091012/2003Z @:CX2SA.LAV.URY.SA #:9141 [Minas] FBB7.00e $:AMSATBB4529
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: Yaesu GS-232B Problems Connecting (Nathaniel S. Parsons)
----------------------------------------------------------------------
Message: 1
Date: Mon, 12 Oct 2009 14:39:46 -0400
From: "Nathaniel S. Parsons" <nsp25@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Yaesu GS-232B Problems Connecting
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Message-ID:
<e9267a810910121139r7be16f98y6ad5e392d4a7db9b@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Nevermind. Seems like all I needed to do was leave it on, and then try
agian.
-Nate
KC2SVI
On Mon, Oct 12, 2009 at 2:17 PM, Nathaniel S. Parsons
<nsp25@xxxxxxx.xxx>wrote:
> Hi,
>
> My 232B has worked fine in the past, but just today is acting up (last time
> I used it was a few months ago). I can't connect to it with hyperterminal or
> HRD.
>
> Following the directions of the manual, I have connected on various bit
> rates (1200, 9600), switched the device on, and hit enter a few times, but I
> never get a successful connection message.
>
> Could it be that the device stops working if it ever goes below a certain
> temperature? It's gotten cold recently, so that's the only thing I can think
> of.
>
> Thanks
> -Nate
> KC2SVI
>
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 4, Issue 529
****************************************
Read previous mail | Read next mail
| |
