| |
G4APL > ALL 04.04.14 17:32l 260 Lines 12553 Bytes #999 (0) @ WW
BID : 60452_GB7CIP
Read: GUEST
Subj: GB7CIP UPGRADE help reqd pls(2)
Path: IZ3LSV<I0OJJ<GB7CIP
Sent: 140404/1526Z @:GB7CIP.#32.GBR.EU #:60452 [Caterham Surrey GBR] $:60452_GB
From: G4APL@GB7CIP.#32.GBR.EU
To : ALL@WW
GB7CIP UPGRADE help reqd pls(2)
My thanks for the feedback from my previous plea for help Matt M0ZAI, Gus
I0OJJ Jim WU3V
Jim I did not know about the dmesg trace command very usefull
Now to follow up from my last bulletin 1 April 2014 GB7CIP UPGRADE help reqd
pls
I am aware the log listing are greated that 78 characters
I spent most of yesterday into the early hours of this morning trying to
establish
what is going on with the serial interfaces.
So back requesting help from Packet Land Support.
I will briefly recap, then give details of my investigations and lastly
the what the system details the serial devices
Moving all the services that have been running for 20 years on my slarkware
ip/ax25 server gb7cip.ampr.org over to Ubuntu. 12.04 lts... kernel 3.5.0-48
A task that I started in the Spring of 2013.
After many false attempts in the previous ten years.
I have copied across my configuration files and edited them to meet the
current
directory structure and interface changes.directory structure and interface changes.
Install and compiled all the source using Charles K4GBB Scripts]
I have a VSCOM TC-800 PCI 8 port serial card vscardcfg-1_62
Using the dmesg trace
We have proved that it is recognised by the system
the six ax ports have been anotated. The other two unused ports
at the moment will be use by linfbb HF Pactor as before
0.384504] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.473977] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
i/f port VSCom Card
[ax3 u432 0.492748] ttyS4: detected caps 00000700 should be 00000500
[ 0.492762] 0000:01:02.0: ttyS4 at I/O 0xef00 (irq = 17) is a
16C950/954
[ax1 u439 0.492903] ttyS5: detected caps 00000700 should be 00000500
[ 0.492913] 0000:01:02.0: ttyS5 at I/O 0xef08 (irq = 17) is a
16C950/954
[ 0.493046] ttyS6: detected caps 00000700 should be 00000500
[ax5 u432b0.493056] 0000:01:02.0: ttyS6 at I/O 0xef10 (irq = 17) is a
16C950/954
[ax4 v50 0.493190] ttyS7: de[ax4 v50 0.493190] ttyS7: detected caps 00000700 should be 00000500
[ 0.493199] 0000:01:02.0: ttyS7 at I/O 0xef18 (irq = 17) is a
16C950/954
[ax0 u433 0.493377] ttyS8: detected caps 00000700 should be 00000500
[ 0.493387] 0000:01:02.1: ttyS8 at I/O 0xed00 (irq = 17) is a
16C950/954
[ PTC2 0.493527] ttyS9: detected caps 00000700 should be 00000500
[ 0.493537] 0000:01:02.1: ttyS9 at I/O 0xed08 (irq = 17) is a
16C950/954
[ax2 v70 0.496275] ttyS10: detected caps 00000700 should be 00000500
[ 0.496286] 0000:01:02.1: ttyS10 at I/O 0xed10 (irq = 17) is a
16C950/954
[ PTC1 0.496430] ttyS11: detected caps 00000700 should be 00000500
[ 0.496440] 0000:01:02.1: ttyS11 at I/O 0xed18 (irq = 17) is a
16C950/954
lspci Correctly Identifies the serial
01:02.0 Serial controller: Titan Electronics Inc VScom 400H 4 port serial
adaptor
01:02.1 Serial controller: Titan Electronics Inc VScom 400HF1 4 port serial
adaptor
The problThe problem
Identfies the TC-800 VScom board correctly
Running kissattach version 1.0.2
If I run kissattach just for the first four interfaces ax0 to ax3
it configures the Interfaces and pick ups the port details from the axports
file
Extract from Kernel Log
Apr 4 01:20:15 gb7cip kernel: [ 0.496570] ttyS4: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.496583] 0000:01:02.0: ttyS4 at I/O
0xef00 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.496726] ttyS5: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.496736] 0000:01:02.0: ttyS5 at I/O
0xef08 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.496871] ttyS6: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.496880] 0000:01:02.0: ttyS6 at I/O
0xef10 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.497015] ttyS7: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kApr 4 01:20:15 gb7cip kernel: [ 0.497024] 0000:01:02.0: ttyS7 at I/O
0xef18 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.497205] ttyS8: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.497215] 0000:01:02.1: ttyS8 at I/O
0xed00 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.497357] ttyS9: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.497367] 0000:01:02.1: ttyS9 at I/O
0xed08 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.497507] ttyS10: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.497517] 0000:01:02.1: ttyS10 at I/O
0xed10 (irq = 17) is a 16C950/954
Apr 4 01:20:15 gb7cip kernel: [ 0.497660] ttyS11: detected caps 00000700
should be 00000500
Apr 4 01:20:15 gb7cip kernel: [ 0.497670] 0000:01:02.1: ttyS11 at I/O
0xed18 (irq = 17) is a 16C950/954
Apr 4 01:21:50 gb7cip kernel: [ 133.104704] mkiss: ax0: crc mode Apr 4 01:21:50 gb7cip kernel: [ 133.104704] mkiss: ax0: crc mode is auto.
Apr 4 01:21:50 gb7cip kernel: [ 133.105109] IPv6: ADDRCONF(NETDEV_CHANGE):
ax0: link becomes ready
Apr 4 01:21:54 gb7cip kernel: [ 137.119205] mkiss: ax1: crc mode is auto.
Apr 4 01:21:54 gb7cip kernel: [ 137.122573] IPv6: ADDRCONF(NETDEV_CHANGE):
ax1: link becomes ready
Apr 4 01:21:58 gb7cip kernel: [ 141.132074] mkiss: ax2: crc mode is auto.
Apr 4 01:21:58 gb7cip kernel: [ 141.135056] IPv6: ADDRCONF(NETDEV_CHANGE):
ax2: link becomes ready
Apr 4 01:22:02 gb7cip kernel: [ 145.144135] mkiss: ax3: crc mode is auto.
Apr 4 01:22:02 gb7cip kernel: [ 145.147110] IPv6: ADDRCONF(NETDEV_CHANGE):
ax3: link becomes ready
Apr 4 01:31:13 gb7cip kernel: [ 696.023192] mkiss: ax3: crc mode is auto.
Apr 4 01:47:08 gb7cip kernel: [ 1650.914089] mkiss: ax1: crc mode is auto.
If I run the kissattach for
If I run kissattach just for all six interfaces ax0 to ax5
with sleep delays, so that I can check the configurationwith sleep delays, so that I can check the configuration setting with
ifconfig
it configures the first four ax0-ax3 Interfaces and pick upi the port details
from
the axports file correctly. continuing ax4 to ax6
Checking the setting again with ifconfig,
I find that ax0, ax3, ax4 have lost there settings e.g
ax0 Link encap:AMPR AX.25 HWaddr
BROADCAST MULTICAST MTU:256 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Early this morning 03:30 hourswhen I left the server running
I had lost three interfaces ax0, ax3, ax4
checking the system which is still running since 03:30 Ihave lost
ax0 ax1 ax3 ax4 i.e only two serial interfaces up.
kernal log extract from the reload this morning all six serial intefaces
### ################## The Following Load is left to run overnight
############
Apr 4 02:58:49Apr 4 02:58:49 gb7cip kernel: [ 0.496141] 0000:01:02.0: ttyS4 at I/O
0xef00 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.496307] ttyS5: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.496317] 0000:01:02.0: ttyS5 at I/O
0xef08 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.496453] ttyS6: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.496462] 0000:01:02.0: ttyS6 at I/O
0xef10 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.496598] ttyS7: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.496607] 0000:01:02.0: ttyS7 at I/O
0xef18 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.496800] ttyS8: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.496810] 0000:01:02.1: ttyS8 at I/O
0xed00 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.496954] ttyS9: detected capApr 4 02:58:49 gb7cip kernel: [ 0.496954] ttyS9: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.496964] 0000:01:02.1: ttyS9 at I/O
0xed08 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.497104] ttyS10: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.497114] 0000:01:02.1: ttyS10 at I/O
0xed10 (irq = 17) is a 16C950/954
Apr 4 02:58:49 gb7cip kernel: [ 0.497255] ttyS11: detected caps 00000700
should be 00000500
Apr 4 02:58:49 gb7cip kernel: [ 0.497265] 0000:01:02.1: ttyS11 at I/O
0xed18 (irq = 17) is a 16C950/954
Apr 4 03:00:21 gb7cip kernel: [ 130.959172] mkiss: ax0: crc mode is auto.
Apr 4 03:00:21 gb7cip kernel: [ 130.959634] IPv6: ADDRCONF(NETDEV_CHANGE):
ax0: link becomes ready
Apr 4 03:00:25 gb7cip kernel: [ 134.975966] mkiss: ax1: crc mode is auto.
Apr 4 03:00:25 gb7cip kernel: [ 134.980656] IPv6: ADDRCONF(NETDEV_CHANGE):
ax1: link becomes ready
Apr 4 03:00:29 gb7cip kernel: [ Apr 4 03:00:29 gb7cip kernel: [ 138.988381] mkiss: ax2: crc mode is auto.
Apr 4 03:00:29 gb7cip kernel: [ 138.992689] IPv6: ADDRCONF(NETDEV_CHANGE):
ax2: link becomes ready
Apr 4 03:00:33 gb7cip kernel: [ 143.001514] mkiss: ax3: crc mode is auto.
Apr 4 03:00:33 gb7cip kernel: [ 143.005291] IPv6: ADDRCONF(NETDEV_CHANGE):
ax3: link becomes ready
Apr 4 03:00:37 gb7cip kernel: [ 147.014007] mkiss: ax4: crc mode is auto.
Apr 4 03:00:37 gb7cip kernel: [ 147.017765] IPv6: ADDRCONF(NETDEV_CHANGE):
ax4: link becomes ready
Apr 4 03:00:41 gb7cip kernel: [ 151.028427] mkiss: ax0: crc mode is auto.
Apr 4 03:00:41 gb7cip kernel: [ 151.037120] mkiss: ax4: crc mode is auto.
Apr 4 03:00:41 gb7cip kernel: [ 151.037578] mkiss: ax5: crc mode is auto.
Apr 4 03:00:41 gb7cip kernel: [ 151.037990] IPv6: ADDRCONF(NETDEV_CHANGE):
ax5: link becomes ready
Apr 4 03:01:05 gb7cip kernel: [ 175.235462] mkiss: ax3: crc mode is auto
Apr 4 03:01:19 gb7cip kernel: [ 188.836533] mkiss: ax6: crc mode is auto.
Apr 4Apr 4 03:01:19 gb7cip kernel: [ 188.851813] IPv6: ADDRCONF(NETDEV_CHANGE):
ax6: link becomes ready
Apr 4 03:02:01 gb7cip kernel: [ 230.680657] mkiss: ax7: crc mode is auto.
Apr 4 03:02:01 gb7cip kernel: [ 230.691875] IPv6: ADDRCONF(NETDEV_CHANGE):
ax7: link becomes ready
Apr 4 03:02:34 gb7cip kernel: [ 264.134716] mkiss: ax8: crc mode is auto.
Apr 4 03:02:34 gb7cip kernel: [ 264.138326] IPv6: ADDRCONF(NETDEV_CHANGE):
ax8: link becomes ready
Apr 4 03:02:51 gb7cip kernel: [ 280.524937] mkiss: ax9: crc mode is auto.
Apr 4 03:02:51 gb7cip kernel: [ 280.534841] IPv6: ADDRCONF(NETDEV_CHANGE):
ax9: link becomes ready
Apr 4 03:03:05 gb7cip kernel: [ 294.913728] mkiss: ax10: crc mode is auto.
Apr 4 03:03:05 gb7cip kernel: [ 294.920428] IPv6: ADDRCONF(NETDEV_CHANGE):
ax10: link becomes ready
Apr 4 03:03:18 gb7cip kernel: [ 307.859752] mkiss: ax11: crc mode is auto.
Apr 4 03:03:18 gb7cip kernel: [ 307.869133] IPv6: ADDRCONF(NETDEV_CHANGE):
ax11: link becomes ready
Apr 4 03:03:34 gb7cipApr 4 03:03:34 gb7cip kernel: [ 323.956963] IPv4 over IPv4 tunneling driver
Apr 4 03:04:00 gb7cip kernel: [ 349.463572] mkiss: ax9: Trying crc-smack
Apr 4 03:14:00 gb7cip kernel: [ 949.464723] mkiss: ax9: Trying crc-flexnet
Apr 4 03:26:49 gb7cip kernel: [ 1718.436030] mkiss: ax1: Trying crc-smack
Apr 4 03:26:49 gb7cip kernel: [ 1718.436623] mkiss: ax1: Trying crc-flexnet
Apr 4 03:26:49 gb7cip kernel: [ 1718.440807] mkiss: ax5: Trying crc-smack
Apr 4 03:26:49 gb7cip kernel: [ 1718.441305] mkiss: ax5: Trying crc-flexnet
Apr 4 03:30:34 gb7cip kernel: [ 1944.082136] mkiss: ax7: Trying crc-smack
Apr 4 03:30:44 gb7cip kernel: [ 1954.112035] mkiss: ax7: Trying crc-flexnet
Apr 4 03:31:01 gb7cip kernel: [ 1970.738598] mkiss: ax10: Trying crc-smack
Apr 4 03:31:11 gb7cip kernel: [ 1980.768038] mkiss: ax10: Trying crc-flexnet
############### 03:40 hours left running overnight
###########################
Spent hours testing, experimenting yesterday on this issue.
System confuSystem confused, and so am I at the moment.
Still a lot more on the task list.
Hope someone out there in Packet Land has the answer, Please
73 de Paul g4apl @ gb7cip.#32.gbr.eu
email paul [at ] skywaves.demon.co.uk
Read previous mail | Read next mail
| |
