| |
IW2OHX > ALL 28.03.08 13:00l 49 Lines 1244 Bytes #999 (0) @ WW
BID : S3IIW2OHX036
Read: GUEST
Subj: Updating RMS / Telpac information
Path: IZ3LSV<IW2OHX
Sent: 080328/1153z @:IW2OHX.ILOM.ITA.EU [Bollate(MI)] obcm1.07b3
From: IW2OHX @ IW2OHX.ILOM.ITA.EU (Marco)
To: ALL @ WW
X-Info: Received by NNTP-gateway
Hi,
now I'm again on air with my Telpac Node.
The problem was in telpac_aci that was stopped. I also upgraded to Telpac
Linux v1.0.4.
Now I need to update my Telpac infomation, such as Town, coordinates,
Locator, ecc...
I noticed that Winlink has new site, but I can't find anymore Telpac
Register page.
According to FAQ in Winlink.org:
"Q9260 How do I change the station description information (registration) of
my Telpac station?
* 9000 Telpac Gateway software
A9260 Go to www.winlink.org ...Winlink Stations.Network Status of Winlink
Gateways in Realtime. In the upper right-hand corner..select "Telpac
Gateways". From this new table of all registered Telpac Winlink Gateway
stations, edit the data for your station. The new data goes in the
right-hand column."
I'm sure that these instructions are referred to old winlink site, because
I'm unable to find that menu.
Anyone can help me in updating RMS Telpac information ?
Thanks
Marco
--
---
OpenBCM Gateway NNTP><AX25
http://iw2ohx.ampr.org:8060
---
Marco Di Martino
Bollate (MI)
www.marcodimartino.it
www.iw2ohx.net
-
Amateur Radio: IW2OHX
IW2OHX@IW2OHX.ILOM.ITA.EU
---
Read previous mail | Read next mail
| |
