| |
G4ZUR > ALL 27.12.09 11:57l 19 Lines 802 Bytes #999 (0) @ WW
BID : 2398_GB7TAM
Read: GUEST
Subj: KAM-XL
Path: IZ3LSV<IK2XDE<DB0RES<DK0WUE<7M3TJZ<ZL2BAU<GB7PZT<GB7MAX<GB7WAL<GB7TAM
Sent: 091227/0614Z @:GB7TAM.#29.GBR.EU #:2398 [Tamworth] $:2398_GB7TAM
From: G4ZUR@GB7TAM.#29.GBR.EU
To : ALL@WW
Hello and thanks for reading this bull.
I have a KAM-XL Using the cssincorp Digital desktop for
Kantronics software.
Problem I can't get the tnc to talk to the computer.
I have done a HARD RESET many times Hi!.
That works as It should, I put software In looking for tnc and It finds a tnc.
It then says tnc has the following 7bits,even parity,1stop bit.
It also says to comunicate with software the tnc should be set to
8bits,no parity,1stop bit. It also says look in tnc manual on how to set this
I must be thick or something cus the only thing I can find In the XL
manual says do a hard reset (no not again).
I trust readers will see my problem, any assistance would be great.
Thanks for reading and a great 2010 to all.
73's de Gareth G4ZUR
Sysop GB7TAM
Read previous mail | Read next mail
| |
