| |
GM7HUD > ALL 27.01.08 02:01l 21 Lines 825 Bytes #999 (0) @ WW
BID : 404981GM7HUD
Read: GUEST
Subj: Re: TINY-2 battery specs ?
Path: IZ3LSV<IW2OHX<OE6XPE<DB0RES<ON0AR<VK6HGR<GB7ESX
Sent: 080126/2000z 01544@GB7ESX.#31.GBR.EU $:404981GM7HUD [Witham, Esx]NNA V3.1
G0TSG wrote:-
>
> Can anyone please tell me the specs of the internal battery ? Mines
> finally given up the ghost - not bad after 20 years !
If I remember correctly it's a 3 or 3.6V cell and isn't rechargable so
anything giving 3V or so should do. You can use 2xAAA or 2xAA cells or
possibly if you want another 20 years, use something like a CR3025 3V
lithium coin cell. You'll need to buy a holder for whatever you chose.
Of course you could just replace the one fitted with the same item assuming
it's still available. Farnell would be a good place to look for a
replacement. I'd buy a pack a cells from your local Poundshop or eBay and
bodge something with insulating tape!
Slighty OT: I have a single 3v Lithium coin cell in a Casio Programmer's
Calculator bought in 1986 still going strong.
73 de Andy GM7HUD
Read previous mail | Read next mail
| |
