| |
YT7MPB > PACKET 02.04.21 14:36l 22 Lines 847 Bytes #999 (0) @ WW
BID : 27320_YU7BPQ
Read: GUEST
Subj: Re: Two modems --> One radio = How?
Path: IZ3LSV<I3XTY<I0OJJ<N6RME<YU7BPQ
Sent: 210402/1332Z 27320@YU7BPQ.#NSD.SRB.EU LinBPQ6.0.21
On 4/2/21 10:45, UT1HZM wrote:
> But you can make intermediate "pig-tail" cable for easy connect/disconnect your modems.
> For example, with use of easy and popular DB-9 or DB-15 jack on near edge
> and on far end permanent connect to radio's back side ACC jacks. (not need to remove far end)
>
> Its no problem for that jacks use in data modes, Yuri RC8SB had FT-1000mp and all worked well.
> There are just few "hints" need to know how operate that jacks.
> Just ask me if you will have plans to try them.
Hello Sergey,
Ok, good to know that worked for Yuri. Did he use it for his pactor
modem only, or also for other packet modem too? (In the same time.)
I might consider making an 'intermediate' cable in time to come. But
wonder if it would accept two different modem/adapters in parallel.
--
73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
Read previous mail | Read next mail
| |
