| |
PD0RZH > ALL 16.01.21 15:10l 29 Lines 764 Bytes #999 (0) @ WW
BID : 616PD0RZH
Read: GUEST
Subj: TEKK KS-1000 Data transceiver for 430 Mhz
Path: IZ3LSV<IR1UAW<IW2OHX<UA6ADV<LU4ECL<VK2RZ<W0ARP<KE0GB<GB7YEW<AL0Y<
KD8FMR<PY2BIL<VE2PKT<PI8CDR<PI8HGL<PI8HGL
Sent: 210116/1341Z @:PI8HGL.#ZH1.NLD.EU Sally 7.2.048 $:616PD0RZH
Good day to you all,
My BBS will switch from frequency in due time. Therefore my TEKK data
transceiver needs to be set to a new frequency. As i understand this could
easily be done with applying a new X-Tall with an appropriate frequency.
Currently my TEKK has been set to 430.9125 Mhz.
Anyone out there who can help me out in getting the right X-tall for this
transceiver for 438.375 Mhz? Or perhaps the details on how to calculate and
such? I see three different X-talls when opening the case. See
http://pd0rzh.beukie.com/page/tekk/tekk.jpg
Two upright on the left and one 21.8550 lying don in the middlenext to the
conector
Thanks in advance.
Regards Rob
73 Rob. PD0RZH
(Message sent with Sally 7.2.048)
BBS PD0RZH@PI8HGL.#ZH1.NLD.EU
Read previous mail | Read next mail
| |
