| |
UT1HZM > PACKET 26.06.08 12:40l 35 Lines 1178 Bytes #999 (0) @ WW
BID : 20503_UT1HZM
Read: GUEST
Subj: Re: FBB and ethernet
Path: IZ3LSV<IK2XDE<DB0RES<DB0GOS<DB0IUZ<DB0FBB<DB0ERF<DB0ABZ<DK0MNL<UT1HZM
Sent: 080626/1026Z @:UT1HZM.KREM.POL.UKR.EU #:20503 [Kremenchug] FBB7.00i
From: UT1HZM@UT1HZM.KREM.POL.UKR.EU
To : PACKET@WW
Hello, Tony
As I'm remember winFBB7.00i don't have direct Ethernet interface,
it was develooped when networks was not much used for packet hi hi...
But its possible to use BPQ switch with Ethernet loaded before Windows to
interface with winfbb in Win9x, only need to distable network card in windows
(hide it from windows), or install second network card, that will be used
only by BPQ. But how much stable this system i'm dont know.
On second end you can install surprus PC 386/486 with much COMs even w/o HDD
with BPQ or XROUTER or Flexnet node program and link them to your main PC
with FBB over Ethernet with BPQ as ethernet-driver...
>
>I can cope with the software and design of the hardware for the Ethernet
>to serial conversions but I am not a windows programmer by a long shot so
>the project would be shelved if there was not network interface in FBB pre
>existing.
>
As on my think its time to write 'from clear paper' new win32 fbb-type BBS
software, that will be easy interface with all modern network and packet
equipment... Any volunteers?!
73, Sergej
--- FBB MsgEdit/Win pre
* Packet forever :-)
Read previous mail | Read next mail
| |
