| |
VK6BE > SIX 20.10.08 01:42l 17 Lines 669 Bytes #999 (0) @ WW
BID : 720871VK6BE
Read: GUEST
Subj: 6 m antenna
Path: IZ3LSV<IK2XDE<DB0RES<DK0WUE<7M3TJZ<F6CDD<F6BVP<VK2TV
Sent: 081020/0029Z @:VK2TV.#MNC.NSW.AUS.OC #:46692 [Kempsey, QF68JX] $:720871VK
From: VK6BE@VK2TV.#MNC.NSW.AUS.OC
To : SIX@WW
When I moved house and wanted a temporary 6m antenna I built a cubical
quad out of scrap timber which I used till I could get a yagi up in the
air.I used end plates of squares of 1" pine, drilled a hole in each of the
four sides and inserted dowel of the length needed to take the wire. I
strung the wire through the ends of the dowels. The boom was a piece of
broom stick pushed into holes in the end plates.I can't remember whether I
used a matching stub or whether I merely soldered the 75 ohm coax directly
onto the driven loop.
It worked well, cost me nothing, and only took an hour or so to make.
Bob VK6BE.
Read previous mail | Read next mail
| |
